lkml.org 
[lkml]   [2018]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 8/9] ARM: dts: at91: sama5d2: add channel cells for ADC device
Date
Preparing the ADC device to connect channel consumer drivers

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5..f06ba99 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>

/ {
model = "Atmel SAMA5D2 family SoC";
@@ -1437,6 +1438,7 @@
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
status = "disabled";
};

--
2.7.4
\
 
 \ /
  Last update: 2018-05-10 12:51    [W:0.093 / U:12.000 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site