lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usbip: vhci_hcd: check rhport before using in vhci_hub_control()
Date
Validate !rhport < 0 before using it to access port_status array.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
---
drivers/usb/usbip/vhci_hcd.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 20e3d4609583..d11f3f8dad40 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -354,6 +354,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
usbip_dbg_vhci_rh(" ClearHubFeature\n");
break;
case ClearPortFeature:
+ if (rhport < 0)
+ goto error;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
if (hcd->speed == HCD_USB3) {
@@ -511,11 +513,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
}

+ if (rhport < 0)
+ goto error;
+
vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
break;
case USB_PORT_FEAT_POWER:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_POWER\n");
+ if (rhport < 0)
+ goto error;
if (hcd->speed == HCD_USB3)
vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
else
@@ -524,6 +531,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case USB_PORT_FEAT_BH_PORT_RESET:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
+ if (rhport < 0)
+ goto error;
/* Applicable only for USB3.0 hub */
if (hcd->speed != HCD_USB3) {
pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
@@ -534,6 +543,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_RESET\n");
+ if (rhport < 0)
+ goto error;
/* if it's already enabled, disable */
if (hcd->speed == HCD_USB3) {
vhci_hcd->port_status[rhport] = 0;
@@ -554,6 +565,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
default:
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
wValue);
+ if (rhport < 0)
+ goto error;
if (hcd->speed == HCD_USB3) {
if ((vhci_hcd->port_status[rhport] &
USB_SS_PORT_STAT_POWER) != 0) {
--
2.14.1
\
 
 \ /
  Last update: 2018-04-06 00:33    [W:0.051 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site