lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 05/30] drm/bridge: analogix_dp: Wait for HPD signal before configuring link
Date
From: zain wang <wzz@rock-chips.com>

According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker
must first detect that the HPD signal is asserted high by the Downstream
Device before establishing a link with it.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
---

drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index bf805f156272..3269deec739d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1169,6 +1169,17 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
if (ret)
goto out_dp_init;

+ /*
+ * According to DP spec v1.3 chap 3.5.1.2 Link Training,
+ * We should first make sure the HPD signal is asserted high by device
+ * when we want to establish a link with it.
+ */
+ ret = analogix_dp_detect_hpd(dp);
+ if (ret) {
+ DRM_ERROR("failed to get hpd single ret = %d\n", ret);
+ goto out_dp_init;
+ }
+
ret = analogix_dp_commit(dp);
if (ret)
goto out_dp_init;
--
2.16.3
\
 
 \ /
  Last update: 2018-04-05 12:03    [W:0.212 / U:10.676 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site