lkml.org 
[lkml]   [2018]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/6] spi: sun6i: coding style/readability improvements
On Tue, Apr 03, 2018 at 06:44:44PM +0300, Sergey Suloev wrote:
> Minor changes to fulfill the coding style and improve
> the readability of the code.
>
> Changes in v2:
> 1) Fixed issue with misplacing a piece of code that requires access
> to the transfer structure into sun6i_spi_prepare_message() function
> where the transfer structure is not available.

This shouldn't be in your commit log.

> Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>
> ---
> drivers/spi/spi-sun6i.c | 97 +++++++++++++++++++++++++++++--------------------
> 1 file changed, 58 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
> index 8533f4e..88ad45e 100644
> --- a/drivers/spi/spi-sun6i.c
> +++ b/drivers/spi/spi-sun6i.c
> @@ -88,8 +88,12 @@
> #define SUN6I_TXDATA_REG 0x200
> #define SUN6I_RXDATA_REG 0x300
>
> +#define SUN6I_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST)
> +
> +#define SUN6I_SPI_MAX_SPEED_HZ 100000000
> +#define SUN6I_SPI_MIN_SPEED_HZ 3000
> +
> struct sun6i_spi {
> - struct spi_master *master;
> void __iomem *base_addr;
> struct clk *hclk;
> struct clk *mclk;
> @@ -189,6 +193,9 @@ static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
> else
> reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
>
> + /* We want to control the chip select manually */
> + reg |= SUN6I_TFR_CTL_CS_MANUAL;
> +
> sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
> }
>
> @@ -197,6 +204,39 @@ static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
> return SUN6I_MAX_XFER_SIZE - 1;
> }
>
> +static int sun6i_spi_prepare_message(struct spi_master *master,
> + struct spi_message *msg)
> +{
> + struct spi_device *spi = msg->spi;
> + struct sun6i_spi *sspi = spi_master_get_devdata(master);
> + u32 reg;
> +
> + /*
> + * Setup the transfer control register: Chip Select,
> + * polarities, etc.
> + */
> + reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
> +
> + if (spi->mode & SPI_CPOL)
> + reg |= SUN6I_TFR_CTL_CPOL;
> + else
> + reg &= ~SUN6I_TFR_CTL_CPOL;
> +
> + if (spi->mode & SPI_CPHA)
> + reg |= SUN6I_TFR_CTL_CPHA;
> + else
> + reg &= ~SUN6I_TFR_CTL_CPHA;
> +
> + if (spi->mode & SPI_LSB_FIRST)
> + reg |= SUN6I_TFR_CTL_FBS;
> + else
> + reg &= ~SUN6I_TFR_CTL_FBS;
> +
> + sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
> +
> + return 0;
> +}
> +

You're doing way more than just "coding style improvements", please
split the patches accordingly.

And slow down between versions, you had 0 review on the v1 and the v2,
and you're at v3 already in just a couple of days.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-04-04 08:46    [W:0.115 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site