lkml.org 
[lkml]   [2018]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH 3/3] arm64: allwinner: h6: enable MMC0/2 on Pine H64
From
Date
Hi,

On 30/04/18 10:51, Icenowy Zheng wrote:
>
>
> 于 2018年4月30日 GMT+08:00 下午5:47:35, Andre Przywara <andre.przywara@arm.com> 写到:
>> Hi Icenowy,
>>
>> On 27/04/18 08:12, Icenowy Zheng wrote:
>>>
>>>
>>> 于 2018年4月27日 GMT+08:00 上午12:46:26, Andre Przywara
>> <andre.przywara@arm.com> 写到:
>>>> Hi,
>>>>
>>>> On 26/04/18 15:07, Icenowy Zheng wrote:
>>>>> The Pine H64 board have a MicroSD slot connected to MMC0 controller
>>>> of
>>>>> the H6 SoC and a eMMC slot connected to MMC2.
>>>>>
>>>>> Enable them in the device tree.
>>>>>
>>>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>>>>> ---
>>>>> .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 32
>>>> ++++++++++++++++++++++
>>>>> 1 file changed, 32 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
>>>> b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
>>>>> index d36de5eb81f3..78b1cd54687c 100644
>>>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
>>>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
>>>>> @@ -20,6 +20,38 @@
>>>>> chosen {
>>>>> stdout-path = "serial0:115200n8";
>>>>> };
>>>>> +
>>>>> + reg_vcc3v3: vcc3v3 {
>>>>> + compatible = "regulator-fixed";
>>>>> + regulator-name = "vcc3v3";
>>>>> + regulator-min-microvolt = <3300000>;
>>>>> + regulator-max-microvolt = <3300000>;
>>>>> + };
>>>>> +
>>>>> + reg_vcc1v8: vcc1v8 {
>>>>> + compatible = "regulator-fixed";
>>>>> + regulator-name = "vcc1v8";
>>>>> + regulator-min-microvolt = <1800000>;
>>>>> + regulator-max-microvolt = <1800000>;
>>>>> + };
>>>>> +};
>>>>> +
>>>>> +&mmc0 {
>>>>> + pinctrl-names = "default";
>>>>> + pinctrl-0 = <&mmc0_pins>;
>>>>> + vmmc-supply = <&reg_vcc3v3>;
>>>>
>>>> So this is actually CLDO1 on the AXP, correct?
>>>
>>> I remember it's coupled between two LDOs, to provide enough power.
>>>
>>>>
>>>>
>>>>> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
>>>>> + status = "okay";
>>>>> +};
>>>>> +
>>>>> +&mmc2 {
>>>>> + pinctrl-names = "default";
>>>>> + pinctrl-0 = <&mmc2_pins>;
>>>>> + vmmc-supply = <&reg_vcc3v3>;
>>>>> + vqmmc-supply = <&reg_vcc1v8>;
>>>>
>>>> And this is BLDO2?
>>>
>>> Yes.
>>>
>>>>
>>>> I am just asking because I want to avoid running into the same
>> problem
>>>> as with the A64 before: that future DTs become incompatible with
>> older
>>>> kernels, because we change the power supply to point to the AXP
>>>> regulators, which this kernel does not support yet.
>>>
>>> The answer is just not to keep this compatibility, as it's not
>>> supported option to update DT without updating kernel.
>>
>> Well, I recognise that statement.. ;-) and I understand that it's far
>> easier to handle it this way. But:
>> - Which .dtb are we going to write into the SPI flash? An older one,
>> which covers all kernels, but lacks features? Or a newer one, which
>> limits the bootable kernels to recent versions?
>> - Which DT are we going to give to EFI applications?
>> - Which DT are the BSDs suspected to take? They don't ship their own
>> DTs
>> (which is good!).
>>
>> So I understand that "shipping the DT with the kernel" is the old
>> (embedded!) way of doing things, but I really believe we should stop
>> relying on this and try to come up with backwards compatible DTs, which
>> live in the firmware and get updated there. Because this is what the
>> distros seem to expect from ARM64 boards these days.
>
> I think in this way we should change the way to submit
> patches -- let DT binding patch be merged when it's ready,
> and do not wait for driver.

Yes, I agree. Ideally we would look at the hardware description, create
a binding just based on that and submit it.

Then the actual DTs and the drivers (for Linux, U-Boot, *BSD,
you-name-it) could be done independently from each other.

I think we should really aim for that. The only question is whether this
is really practical, since the documentation is sometimes lacking and we
may discover missing properties during driver development.
So when we meanwhile do hand-in-hand development, we should make sure we
don't break anything in the future.

>>> P.S. I think the DT will update twice on the kernel side, the
>>> first time keep reg_vcc3v3 (as it's coupled) but use real
>>> regulator for reg_vcc1v8, the second time use the real
>>> coupled regulator for reg_vcc3v3.
>>>
>>>>
>>>> It looks like there are more users of those power rails, so we could
>>>> keep those supplies connected to these fixed regulators here, even
>> with
>>>> AXP-805 support in the kernel.
>>>
>>> It's not a good choice.
>>>
>>>>
>>>> Or we keep this back until we get proper AXP support in the kernel?
>> I
>>>> guess it's quite close to the existing PMICs, so it might be more a
>>>> copy&paste exercise to support the AXP-805?
>>>
>>> It's not a reason to keep it back.
>>
>> So I compared the manuals of the AXP806 and the AXP805, the register
>> interface looks identical to me. I only have a (somewhat) Chinese
>> version of the AXP806 manual, so couldn't really find the difference
>> between the two. Do you know more about it? Is it just maybe the
>> packaging and the electrical properties (like max current supported)?
>>
>> If the I2C register interface is really the same, we could just add the
>> DT nodes for the regulator and be done.
>
> They're the same. My following patchset adds AXP805
> compatible just to use AXP806 code. I have asked Wink
> and the answer is that they have only preset difference.

Ah, thanks for that, that's good info!
So in this case we don't even need to add the compatible name to the
driver, just add it to the binding doc and create (or copy) the DT
snippets. See last week's discussion ;-)
And we could aim to merge this together with the MMC driver, so that
there would be no regression.
Isn't that doable? I am happy to review patches on short notice (if you
have them already, otherwise I am happy to make them).

So in summary it looks like all changes could be purely binding doc/DT
changes, so any 4.17 kernel would work already, when presented with the
right DT.

Cheers,
Andre.


>
>>
>> Cheers,
>> Andre.
>>
>>>
>>>>
>>>> But apart from this this looks correct to me.
>>>>
>>>> Cheers,
>>>> Andre.
>>>>
>>>>> + non-removable;
>>>>> + cap-mmc-hw-reset;
>>>>> + status = "okay";
>>>>> };
>>>>>
>>>>> &uart0 {
>>>>>

\
 
 \ /
  Last update: 2018-04-30 12:45    [W:0.130 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site