lkml.org 
[lkml]   [2018]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 8/9] ARM: dts: at91: sama5d2: add channel cells for ADC device
    Date
    Preparing the ADC device to connect channel consumer drivers

    Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
    ---
    arch/arm/boot/dts/sama5d2.dtsi | 2 ++
    1 file changed, 2 insertions(+)

    diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
    index 61f68e5..f06ba99 100644
    --- a/arch/arm/boot/dts/sama5d2.dtsi
    +++ b/arch/arm/boot/dts/sama5d2.dtsi
    @@ -47,6 +47,7 @@
    #include <dt-bindings/dma/at91.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/at91.h>
    +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>

    / {
    model = "Atmel SAMA5D2 family SoC";
    @@ -1437,6 +1438,7 @@
    atmel,max-sample-rate-hz = <20000000>;
    atmel,startup-time-ms = <4>;
    atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
    + #io-channel-cells = <1>;
    status = "disabled";
    };

    --
    2.7.4
    \
     
     \ /
      Last update: 2018-04-30 12:37    [W:5.233 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site