lkml.org 
[lkml]   [2018]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/6] spi: sun4i: use completion provided by SPI core driver
Date
As long as the completion already provided by the SPI core
then there is no need to waste extra-memory on this.
Also a waiting function was added to avoid code duplication.

Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>
---
drivers/spi/spi-sun4i.c | 62 ++++++++++++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index 899e956..9d1bc20 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -92,8 +92,6 @@ struct sun4i_spi {
struct clk *hclk;
struct clk *mclk;

- struct completion done;
-
const u8 *tx_buf;
u8 *rx_buf;
int len;
@@ -213,13 +211,36 @@ static size_t sun4i_spi_max_transfer_size(struct spi_device *spi)
return SUN4I_FIFO_DEPTH;
}

+static int sun4i_spi_wait_for_transfer(struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct spi_master *master = spi->master;
+ unsigned int start, end, tx_time;
+ unsigned int timeout;
+
+ /* calc required timeout from given speed & len values */
+ tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+ start = jiffies;
+ timeout = wait_for_completion_timeout(&master->xfer_completion,
+ msecs_to_jiffies(tx_time));
+ end = jiffies;
+ if (!timeout) {
+ dev_warn(&master->dev,
+ "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+ dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+ jiffies_to_msecs(end - start), tx_time);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
static int sun4i_spi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
{
struct sun4i_spi *sspi = spi_master_get_devdata(master);
- unsigned int mclk_rate, div, timeout;
- unsigned int start, end, tx_time;
+ unsigned int mclk_rate, div;
unsigned int tx_len = 0;
int ret = 0;
u32 reg;
@@ -228,7 +249,6 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
if (tfr->len > SUN4I_FIFO_DEPTH)
return -EMSGSIZE;

- reinit_completion(&sspi->done);
sspi->tx_buf = tfr->tx_buf;
sspi->rx_buf = tfr->rx_buf;
sspi->len = tfr->len;
@@ -329,22 +349,8 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);

- tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
- start = jiffies;
- timeout = wait_for_completion_timeout(&sspi->done,
- msecs_to_jiffies(tx_time));
- end = jiffies;
- if (!timeout) {
- dev_warn(&master->dev,
- "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
- dev_name(&spi->dev), tfr->len, tfr->speed_hz,
- jiffies_to_msecs(end - start), tx_time);
- ret = -ETIMEDOUT;
- goto out;
- }
-
+ ret = sun4i_spi_wait_for_transfer(spi, tfr);

-out:
sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);

return ret;
@@ -352,14 +358,18 @@ out:

static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
{
- struct sun4i_spi *sspi = dev_id;
- u32 status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG);
+ struct spi_master *master = dev_id;
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ u32 status;
+
+ status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG);

/* Transfer complete */
if (status & SUN4I_INT_CTL_TC) {
- sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG,
+ SUN4I_INT_CTL_TC);
sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
- complete(&sspi->done);
+ spi_finalize_current_transfer(master);
return IRQ_HANDLED;
}

@@ -456,7 +466,7 @@ static int sun4i_spi_probe(struct platform_device *pdev)
}

ret = devm_request_irq(&pdev->dev, irq, sun4i_spi_handler,
- 0, dev_name(&pdev->dev), sspi);
+ 0, dev_name(&pdev->dev), master);
if (ret) {
dev_err(&pdev->dev, "Cannot request IRQ\n");
goto err_free_master;
@@ -476,8 +486,6 @@ static int sun4i_spi_probe(struct platform_device *pdev)
goto err_free_master;
}

- init_completion(&sspi->done);
-
/*
* This wake-up/shutdown pattern is to be able to have the
* device woken up, even if runtime_pm is disabled
--
2.16.2
\
 
 \ /
  Last update: 2018-04-03 17:30    [W:0.069 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site