lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] media: Add a driver for the ov7251 camera sensor
On Thu, Apr 26, 2018 at 10:04:25AM +0300, Todor Tomov wrote:
> Hi Sakari,
>
> On 26.04.2018 09:50, Sakari Ailus wrote:
> > Hi Todor,
> >
> > On Wed, Apr 25, 2018 at 07:20:46PM +0300, Todor Tomov wrote:
> > ...
> >> +static int ov7251_write_reg(struct ov7251 *ov7251, u16 reg, u8 val)
> >> +{
> >> + u8 regbuf[3];
> >> + int ret;
> >> +
> >> + regbuf[0] = reg >> 8;
> >> + regbuf[1] = reg & 0xff;
> >> + regbuf[2] = val;
> >> +
> >> + ret = i2c_master_send(ov7251->i2c_client, regbuf, 3);
> >> + if (ret < 0) {
> >> + dev_err(ov7251->dev, "%s: write reg error %d: reg=%x, val=%x\n",
> >> + __func__, ret, reg, val);
> >> + return ret;
> >> + }
> >> +
> >> + return 0;
> >
> > How about:
> >
> > return ov7251_write_seq_regs(ov7251, reg, &val, 1);
> >
> > And put the function below ov2751_write_seq_regs().
>
> I'm not sure... It will calculate message length each time and then check
> that it is not greater than 5, which it is. Seems redundant.
>
> >
> >> +}
> >> +
> >> +static int ov7251_write_seq_regs(struct ov7251 *ov7251, u16 reg, u8 *val,
> >> + u8 num)
> >> +{
> >> + const u8 maxregbuf = 5;
> >> + u8 regbuf[maxregbuf];
> >> + u8 nregbuf = sizeof(reg) + num * sizeof(*val);
> >> + int ret = 0;
> >> +
> >> + if (nregbuf > maxregbuf)
> >> + return -EINVAL;
> >> +
> >> + regbuf[0] = reg >> 8;
> >> + regbuf[1] = reg & 0xff;
> >> +
> >> + memcpy(regbuf + 2, val, num);
> >> +
> >> + ret = i2c_master_send(ov7251->i2c_client, regbuf, nregbuf);
> >> + if (ret < 0) {
> >> + dev_err(ov7251->dev, "%s: write seq regs error %d: first reg=%x\n",
> >
> > This line is over 80...
>
> Yes indeed. Somehow checkpatch does not report this line, I don't know why.
>
> >
> > If you're happy with these, I can make the changes, too; they're trivial.
>
> Only the second one? Thanks :)

Works for me. I'd still think the overhead of managing the buffer is
irrelevant where to having an extra function to do essentially the same
thing is a source of maintenance and review work. Note that we're even now
spending time to discuss it. ;-)

--
Kind regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi

\
 
 \ /
  Last update: 2018-04-26 09:17    [W:1.337 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site