lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: dataflash: replace msleep with usleep_range
On Wed, 18 Apr 2018 11:26:26 +0200
Luca Ellero <luca.ellero@brickedbrain.com> wrote:

> Since msleep is based on jiffies, this 3 ms sleep becomes actually 20 ms.
> Worst of all, since this sleep is used in a loop when writing, a single page
> write (256 to 1024 bytes) causes 17 ms extra time.
> When writing large files (for example u-boot is usually 512 KB) this delay
> adds up to minutes.
> See Documentation/timers/timers-howto.txt "Why not msleep for (1ms - 20ms)".
>
> Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>

Applied.

Thanks,

Boris

> ---
> drivers/mtd/devices/mtd_dataflash.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
> index aaaeaae..3a6f450 100644
> --- a/drivers/mtd/devices/mtd_dataflash.c
> +++ b/drivers/mtd/devices/mtd_dataflash.c
> @@ -140,7 +140,7 @@ static int dataflash_waitready(struct spi_device *spi)
> if (status & (1 << 7)) /* RDY/nBSY */
> return status;
>
> - msleep(3);
> + usleep_range(3000, 4000);
> }
> }
>

\
 
 \ /
  Last update: 2018-04-26 20:04    [W:0.198 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site