lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC 09/13] arm64: dts: allwinner: a64: Add HDMI support
Date
Hi,

Dne torek, 24. april 2018 ob 15:34:21 CEST je Jagan Teki napisal(a):
> HDMI on Allwinner A64 has similar behavior like H3/H5, so
> reuse the same dts node details for A64.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28
> +++++++++++++++++++++++++++ include/dt-bindings/clock/sun50i-a64-ccu.h |
> 2 ++
> 2 files changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index
> b8734319dc77..aa73f1ce1ab2 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -705,6 +705,34 @@
> #interrupt-cells = <3>;
> };
>
> + hdmi: hdmi@1ee0000 {
> + compatible = "allwinner,sun50i-a64-dw-hdmi",
> + "allwinner,sun8i-a83t-dw-hdmi";
> + reg = <0x01ee0000 0x10000>;
> + reg-io-width = <1>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
> + <&ccu CLK_HDMI>;
> + clock-names = "iahb", "isfr", "tmds";
> + resets = <&ccu RST_BUS_HDMI1>;
> + reset-names = "ctrl";
> + phys = <&hdmi_phy>;
> + phy-names = "hdmi-phy";
> + status = "disabled";
> + };
> +
> + hdmi_phy: hdmi-phy@1ef0000 {
> + compatible = "allwinner,sun50i-a64-hdmi-phy",
> + "allwinner,sun8i-h3-hdmi-phy";
> + reg = <0x01ef0000 0x10000>;
> + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
> + <&ccu CLK_PLL_VIDEO0>;
> + clock-names = "bus", "mod", "pll-0";

Unfortunately, that won't work in all cases. HDMI has two possible clock
parents and only one can be selected. If HDMI controller clock has PLL_VIDEO1
as a source, you will calculate wrong divider in HDMI PHY, since you will base
calculations on PLL_VIDEO0. I think driver needs an expansion.

That is also one of the reasons why I didn't yet send A64 HDMI patch series (I
didn't figure out this part yet). The other reason is that I'm waiting on SRAM
C claiming code.

Best regards,
Jernej

> + resets = <&ccu RST_BUS_HDMI0>;
> + reset-names = "phy";
> + #phy-cells = <0>;
> + };
> +
> rtc: rtc@1f00000 {
> compatible = "allwinner,sun6i-a31-rtc";
> reg = <0x01f00000 0x54>;
> diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h
> b/include/dt-bindings/clock/sun50i-a64-ccu.h index
> d66432c6e675..a054ff665d6e 100644
> --- a/include/dt-bindings/clock/sun50i-a64-ccu.h
> +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
> @@ -43,6 +43,8 @@
> #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
> #define _DT_BINDINGS_CLK_SUN50I_A64_H_
>
> +#define CLK_PLL_VIDEO0 7
> +
> #define CLK_PLL_PERIPH0 11
>
> #define CLK_BUS_MIPI_DSI 28
> --
> 2.14.3




\
 
 \ /
  Last update: 2018-04-24 17:28    [W:0.167 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site