lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/8] dt-bindings: display: atmel: optional video-interface of endpoints
On Mon, 23 Apr 2018 09:22:55 +0200
Peter Rosin <peda@axentia.se> wrote:

> With bus-type/bus-width properties in the endpoint nodes, the video-
> interface of the connection can be specified for cases where the
> heuristic fails to select the correct output mode. This can happen
> e.g. if not all RGB pins are routed on the PCB; the driver has no
> way of knowing this, and needs to be told explicitly.
>
> This is critical for the devices that have the "conflicting output
> formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
> RGB bits move around depending on the selected output mode. For
> devices that do not have the "conflicting output formats" issue
> (SAMA5D2, SAMA5D4), this is completely irrelevant.
>
> Signed-off-by: Peter Rosin <peda@axentia.se>

Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>

> ---
> .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
> index 82f2acb3d374..9de434a8f523 100644
> --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
> +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
> @@ -15,6 +15,14 @@ Required children nodes:
> to external devices using the OF graph reprensentation (see ../graph.txt).
> At least one port node is required.
>
> +Optional properties in grandchild nodes:
> + Any endpoint grandchild node may specify a desired video interface
> + according to ../../media/video-interfaces.txt, specifically
> + - bus-type: must be <0>.
> + - bus-width: recognized values are <12>, <16>, <18> and <24>, and
> + override any output mode selection heuristic, forcing "rgb444",
> + "rgb565", "rgb666" and "rgb888" respectively.
> +
> Example:
>
> hlcdc: hlcdc@f0030000 {
> @@ -50,3 +58,21 @@ Example:
> #pwm-cells = <3>;
> };
> };
> +
> +
> +Example 2: With a video interface override to force rgb565; as above
> +but with these changes/additions:
> +
> + &hlcdc {
> + hlcdc-display-controller {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
> +
> + port@0 {
> + hlcdc_panel_output: endpoint@0 {
> + bus-type = <0>;
> + bus-width = <16>;
> + };
> + };
> + };
> + };

\
 
 \ /
  Last update: 2018-04-23 19:41    [W:0.176 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site