lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 2/6] regulator: bindings: Add properties for coupled regulators
Date
Some regulators require keeping their voltage spread below defined
max_spread.

Add properties to provide information on regulators' coupling.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/regulator/regulator.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 2babe15b..a096fae 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -68,6 +68,11 @@ Optional properties:
0: Disable active discharge.
1: Enable active discharge.
Absence of this property will leave configuration to default.
+- regulator-coupled-with: Regulators with which the regulator
+ is coupled. The linkage is 2-way - all coupled regulators should be linked
+ with each other. A regulator should not be coupled with its supplier.
+- regulator-coupled-max-spread: Max spread between voltages of coupled regulators
+ in microvolts.

Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
--
2.7.4
\
 
 \ /
  Last update: 2018-04-23 16:34    [W:0.395 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site