lkml.org 
[lkml]   [2018]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 13/22] iommu: introduce page response function
On Mon, Apr 16, 2018 at 10:49:02PM +0100, Jacob Pan wrote:
[...]
> + /*
> + * Check if we have a matching page request pending to respond,
> + * otherwise return -EINVAL
> + */
> + list_for_each_entry_safe(evt, iter, &param->fault_param->faults, list) {

I don't think you need the "_safe" iterator if you're exiting the loop
right after removing the event.

> + if (evt->pasid == msg->pasid &&
> + msg->page_req_group_id == evt->page_req_group_id) {
> + msg->private_data = evt->iommu_private;

Ah sorry, I missed this bit in my review of 10/22. I thought
private_data would be for evt->device_private. In this case I guess we
can drop device_private, or do you plan to use it?

> + ret = domain->ops->page_response(dev, msg);
> + list_del(&evt->list);
> + kfree(evt);
> + break;
> + }
> + }
> +
> +done_unlock:
> + mutex_unlock(&param->fault_param->lock);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_page_response);
> +
> static void __iommu_detach_device(struct iommu_domain *domain,
> struct device *dev)
> {
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 32435f9..058b552 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -163,6 +163,55 @@ struct iommu_resv_region {
> #ifdef CONFIG_IOMMU_API
>
> /**
> + * enum page_response_code - Return status of fault handlers, telling the IOMMU
> + * driver how to proceed with the fault.
> + *
> + * @IOMMU_FAULT_STATUS_SUCCESS: Fault has been handled and the page tables
> + * populated, retry the access. This is "Success" in PCI PRI.
> + * @IOMMU_FAULT_STATUS_FAILURE: General error. Drop all subsequent faults from
> + * this device if possible. This is "Response Failure" in PCI PRI.
> + * @IOMMU_FAULT_STATUS_INVALID: Could not handle this fault, don't retry the
> + * access. This is "Invalid Request" in PCI PRI.
> + */
> +enum page_response_code {
> + IOMMU_PAGE_RESP_SUCCESS = 0,
> + IOMMU_PAGE_RESP_INVALID,
> + IOMMU_PAGE_RESP_FAILURE,
> +};

Field names aren't consistent with the comment. I'd go with
IOMMU_PAGE_RESP_*

> +
> +/**
> + * enum page_request_handle_t - Return page request/response handler status
> + *
> + * @IOMMU_FAULT_STATUS_HANDLED: Stop processing the fault, and do not send a
> + * reply to the device.
> + * @IOMMU_FAULT_STATUS_CONTINUE: Fault was not handled. Call the next handler,
> + * or terminate.
> + */
> +enum page_request_handle_t {
> + IOMMU_PAGE_RESP_HANDLED = 0,
> + IOMMU_PAGE_RESP_CONTINUE,

Same here regarding the comment. Here I'd prefer "iommu_fault_status_t"
for the enum and IOMMU_FAULT_STATUS_* for the fields, because they can
be used for unrecoverable faults as well.

But since you're not using these values in your patches, I guess you can
drop this enum? At the moment the return value of fault handler is 0 (as
specified at iommu_register_device_fault_handler), meaning that the
handler always takes ownership of the fault.

It will be easy to extend once we introduce multiple fault handlers that
can either take the fault or pass it to the next one. Existing
implementations will still return 0 - HANDLED, and new ones will return
either HANDLED or CONTINUE.

> +/**
> + * Generic page response information based on PCI ATS and PASID spec.
> + * @addr: servicing page address
> + * @pasid: contains process address space ID
> + * @resp_code: response code
> + * @page_req_group_id: page request group index
> + * @type: group or stream/single page response

@type isn't in the structure

> + * @private_data: uniquely identify device-specific private data for an
> + * individual page response

IOMMU-specific? If it is set by iommu.c, I think we should comment about
it, something like "This field is written by the IOMMU core". Maybe also
rename it to iommu_private to be consistent with iommu_fault_event

> + */
> +struct page_response_msg {
> + u64 addr;
> + u32 pasid;
> + enum page_response_code resp_code;
> + u32 pasid_present:1;
> + u32 page_req_group_id;
> + u64 private_data;
> +};
> +
> +/**
> * struct iommu_ops - iommu ops and capabilities
> * @capable: check capability
> * @domain_alloc: allocate iommu domain
> @@ -195,6 +244,7 @@ struct iommu_resv_region {
> * @bind_pasid_table: bind pasid table pointer for guest SVM
> * @unbind_pasid_table: unbind pasid table pointer and restore defaults
> * @sva_invalidate: invalidate translation caches of shared virtual address
> + * @page_response: handle page request response
> */
> struct iommu_ops {
> bool (*capable)(enum iommu_cap);
> @@ -250,6 +300,7 @@ struct iommu_ops {
> struct device *dev);
> int (*sva_invalidate)(struct iommu_domain *domain,
> struct device *dev, struct tlb_invalidate_info *inv_info);
> + int (*page_response)(struct device *dev, struct page_response_msg *msg);
>
> unsigned long pgsize_bitmap;
> };
> @@ -471,6 +522,7 @@ extern int iommu_unregister_device_fault_handler(struct device *dev);
>
> extern int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt);
>
> +extern int iommu_page_response(struct device *dev, struct page_response_msg *msg);

Please also define a -ENODEV function for !CONFIG_IOMMU_API, otherwise
it doesn't build.

And I think struct page_response_msg and the enums should be declared
outside #ifdef CONFIG_IOMMU_API. Same for struct iommu_fault_event and
the enums in patch 10/22. Otherwise device drivers will have to add
#ifdefs everywhere their code accesses these structures.

Thanks,
Jean

> extern int iommu_group_id(struct iommu_group *group);
> extern struct iommu_group *iommu_group_get_for_dev(struct device *dev);
> extern struct iommu_domain *iommu_group_default_domain(struct iommu_group *);
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-04-23 13:48    [W:0.278 / U:6.580 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site