lkml.org 
[lkml]   [2018]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/6] drm/panel: Add support for the EDT ETM0700G0BDH6
Date
From: Jan Tuerk <jan.tuerk@emtrion.com>

The Emerging Display Technology ETM0700G0BDH6 is exactly
the same display as the ETM0700G0DH6, exept the pixelclock
polarity. Therefore re-use the ETM0700G0DH6 modes. It is
used by default on emtrion Avari based development kits.

Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
---
drivers/gpu/drm/panel/panel-simple.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cbf1ab404ee7..8b7feb2888f2 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -909,6 +909,18 @@ static const struct panel_desc edt_etm0700g0dh6 = {
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
};

+static const struct panel_desc edt_etm0700g0bdh6 = {
+ .modes = &edt_etm0700g0dh6_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+};
+
static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
.clock = 32260,
.hdisplay = 800,
@@ -2134,6 +2146,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "edt,etm0700g0dh6",
.data = &edt_etm0700g0dh6,
}, {
+ .compatible = "edt,etm0700g0bdh6",
+ .data = &edt_etm0700g0bdh6,
+ }, {
.compatible = "foxlink,fl500wvr00-a0t",
.data = &foxlink_fl500wvr00_a0t,
}, {
--
2.11.0
\
 
 \ /
  Last update: 2018-04-20 14:58    [W:0.230 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site