lkml.org 
[lkml]   [2018]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] arm64: dts: Add msm8998 SoC and MTP board support
Date
Quoting Bjorn Andersson (2018-03-27 09:01:53)
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
> new file mode 100644
> index 000000000000..0f2f0e0de74f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
> +
> +#include "msm8998.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &blsp2_uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0";

Plus :115200n8?

> + };
> +};
> +
> +&soc {
> + serial@0c1b0000 {
> + status = "okay";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> new file mode 100644
> index 000000000000..9e2c0ff7457f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-msm8998.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. MSM 8998";
> +
> + interrupt-parent = <&intc>;
> +
> + qcom,msm-id = <292 0x0>;

Sadface.

> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
[...]
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> +
> + core1 {
> + cpu = <&CPU5>;
> + };
> +
> + core2 {
> + cpu = <&CPU6>;
> + };
> +
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };

Is this accurate? Or it's describing the power hierarchy?

> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 1 0xf08>,
> + <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 0 0xf08>;

Are these 0xf08 things accurate?

> + clock-frequency = <19200000>;

Drop? Should come from hardware.

> + };
> +
> + clocks {
> + xo_board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <19200000>;
> + clock-output-names = "xo_board";

The output names aren't needed.

> + };
> +
> + sleep_clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32764>;
> + clock-output-names = "sleep_clk";
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + soc: soc {};
> +};
> +
> +&soc {

Ok!

> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + reg = <0x17a00000 0x10000>, /* GICD */
> + <0x17b00000 0x100000>; /* GICR * 8 */
> + #interrupt-cells = <3>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;

Was this stride stuff needed still?

> + interrupts = <1 9 4>;

Use special GIC flags?

> + };
> +
> + gcc: clock-controller@100000 {
> + compatible = "qcom,gcc-msm8998";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + reg = <0x100000 0xb0000>;
> + };
> +
> + blsp2_uart1: serial@0c1b0000 {

Drop leading zeroes please.

> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0xc1b0000 0x1000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
> + <&gcc GCC_BLSP2_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + timer@17920000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x17920000 0x1000>;
> + clock-frequency = <19200000>;

Read from hardware instead?

\
 
 \ /
  Last update: 2018-04-20 00:59    [W:0.337 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site