Messages in this thread | | | Date | Thu, 19 Apr 2018 22:55:04 +0300 | From | Alexey Dobriyan <> | Subject | Re: [PATCH] proc/stat: Separate out individual irq counts into /proc/stat_irqs |
| |
On Thu, Apr 19, 2018 at 03:28:40PM -0400, Waiman Long wrote: > On 04/19/2018 03:08 PM, Alexey Dobriyan wrote: > >> Therefore, application performance can be impacted if the application > >> reads /proc/stat rather frequently. > > [nods] > > Text interfaces can be designed in a very stupid way. > > > >> For example, reading /proc/stat in a certain 2-socket Skylake server > >> took about 4.6ms because it had over 5k irqs. > > Is this top(1)? What is this application doing? > > If it needs percpu usage stats, then maybe /proc/stat should be > > converted away from single_open() so that core seq_file code doesn't > > generate everything at once. > > The application is actually a database benchmarking tool used by a > customer.
So it probably needs lines before "intr" line.
> The reading of /proc/stat is an artifact of the benchmarking > tool that can actually be turned off. Without doing that, about 20% of > CPU time were spent reading /proc/stat and the trashing of cachelines > slowed the benchmark number quite significantly. However, I was also > told that there are legitimate cases where reading /proc/stat was > necessary in some of their applications. > > >> - > >> - /* sum again ? it could be updated? */ > >> - for_each_irq_nr(j) > >> - seq_put_decimal_ull(p, " ", kstat_irqs_usr(j)); > >> - > > This is direct userspace breakage. > > Yes, I am aware of that. That is the cost of improving the performance > of applications that read /proc/stat, but don't need the individual irq > counts.
Yeah, but all it takes is one script which cares.
I have an idea.
Maintain "maximum registered irq #", it should be much smaller than "nr_irqs":
intr 4245359 151 0 0 0 0 0 0 0 38 0 0 0 0 0 0 0 0 0 64 0 0 0 0 0 0 0 0 0 0 44330 182364 57741 0 0 0 0 0 0 0 0 85 89124 0 0 0 0 0 323360 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Or maintain array of registered irqs and iterate over them only.
I have another idea.
perf record shows mutex_lock/mutex_unlock at the top. Most of them are irq mutex not seqfile mutex as there are many more interrupts than reads. Take it once.
| |