[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[net-next PATCH v4 00/13] Add support for netcp driver on K2G SoC
K2G SoC is another variant of Keystone family of SoCs. This patch
series add support for NetCP driver on this SoC. The QMSS found on
K2G SoC is a cut down version of the QMSS found on other keystone
devices with less number of queues, internal link ram etc. The patch
series has 2 patch sets that goes into the drivers/soc and the
rest has to be applied to net sub system. Please review and merge
if this looks good.

K2G TRM is located at

The boot logs on K2G ICE board (tftp boot over Ethernet and from mmc)

The boot logs on K2G GP board (tftp boot over Ethernet and from mmc)

Also regressed boot on K2HK and K2L EVMs as we have modified GBE
version detection logic (K2E uses same version of NetCP as in K2L.
So regression on one of them is needed).

Boot log on K2L and K2HK EVMs are at

This series applies to net-next master branch.

Change history:
v4 - ready for merge to net-next
Folded the series "Add promiscous mode support in k2g network driver"
into this.
Fixed a typo in 5/11 (sgmii to rgmii) based on TI internal comment
Reworked 4/11 and title changed to reflect additional changes to
exclude sgmii configuration code for 2U cpsw. Use IS_SS_ID_2U()
macro for customization.
Added Reviewed-by from Rob Herring against 1/13
v3 - Addressed comments from Andrew Lunn and Grygorii Strashko
against v2.
v2 - Addressed following comments on initial version
- split patch 3/5 to multiple patches from Andrew Lunn

Murali Karicheri (11):
soc: ti: K2G: enhancement to support QMSS in K2G NAVSS
soc: ti: K2G: provide APIs to support driver probe deferral
net: netcp: ethss: use macro for checking ss_version consistently
net: netcp: ethss: make sgmii configuration conditional
net: netcp: ethss: add support for handling rgmii link interface
net: netcp: ethss: use rgmii link status for 2u cpsw hardware
net: netcp: ethss: map vlan priorities to zero flow
net: netcp: ethss: re-use stats handling code for 2u hardware
net: netcp: ethss: use of_get_phy_mode() to support different RGMII
Revert "net: netcp: remove dead code from the driver"
net: netcp: support probe deferral

WingMan Kwok (2):
net: netcp: add api to support set rx mode in netcp modules
net: netcp: ethss: k2g: add promiscuous mode support

.../bindings/soc/ti/keystone-navigator-qmss.txt | 9 +-
drivers/net/ethernet/ti/netcp.h | 3 +
drivers/net/ethernet/ti/netcp_core.c | 32 ++++
drivers/net/ethernet/ti/netcp_ethss.c | 181 +++++++++++++++++----
drivers/soc/ti/knav_dma.c | 8 +
drivers/soc/ti/knav_qmss.h | 6 +
drivers/soc/ti/knav_qmss_queue.c | 98 ++++++++---
include/linux/soc/ti/knav_dma.h | 12 ++
include/linux/soc/ti/knav_qmss.h | 1 +
9 files changed, 297 insertions(+), 53 deletions(-)


 \ /
  Last update: 2018-04-17 23:33    [W:0.070 / U:0.900 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site