lkml.org 
[lkml]   [2018]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] regulator: dt-bindings: add QCOM RPMh regulator bindings
On Fri, Apr 13, 2018 at 07:50:34PM -0700, David Collins wrote:
> Introduce bindings for RPMh regulator devices found on some
> Qualcomm Technlogies, Inc. SoCs. These devices allow a given
> processor within the SoC to make PMIC regulator requests which
> are aggregated within the RPMh hardware block along with requests
> from other processors in the SoC to determine the final PMIC
> regulator hardware state.
>
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> ---
> .../bindings/regulator/qcom,rpmh-regulator.txt | 207 +++++++++++++++++++++
> .../dt-bindings/regulator/qcom,rpmh-regulator.h | 36 ++++
> 2 files changed, 243 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h
>
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> new file mode 100644
> index 0000000..69748ea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> @@ -0,0 +1,207 @@
> +Qualcomm Technologies, Inc. RPMh Regulators
> +
> +rpmh-regulator devices support PMIC regulator management via the Voltage
> +Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. The APPS
> +processor communicates with these hardware blocks via a Resource State
> +Coordinator (RSC) using command packets. The VRM allows changing four
> +parameters for a given regulator: enable state, output voltage, operating mode,
> +and minimum headroom voltage. The XOB allows changing only a single parameter
> +for a given regulator: its enable state. Despite its name, the XOB is capable
> +of controlling the enable state of any PMIC peripheral. It is used for clock
> +buffers, low-voltage switches, and LDO/SMPS regulators which have a fixed
> +voltage and mode.
> +
> +=======================
> +Required Node Structure
> +=======================
> +
> +RPMh regulators must be described in two levels of device nodes. The first
> +level describes the PMIC containing the regulators and must reside within an
> +RPMh device node. The second level describes each regulator within the PMIC
> +which is to be used on the board. Each of these regulators maps to a single
> +RPMh resource.
> +
> +The names used for regulator nodes must match those supported by a given PMIC.
> +Supported regulator node names:
> + PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
> + PMI8998: bob
> + PM8005: smps1 - smps4
> +
> +========================
> +First Level Nodes - PMIC
> +========================
> +
> +- compatible
> + Usage: required
> + Value type: <string>
> + Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
> + "qcom,pmi8998-rpmh-regulators" or
> + "qcom,pm8005-rpmh-regulators".
> +
> +- qcom,pmic-id
> + Usage: required
> + Value type: <string>
> + Definition: RPMh resource name suffix used for the regulators found on
> + this PMIC. Typical values: "a", "b", "c", "d", "e", "f".
> +
> +- vdd_s1-supply

Use '-' rather than '_' on all these.

> +- vdd_s2-supply
> +- vdd_s3-supply
> +- vdd_s4-supply
> +- vdd_s5-supply
> +- vdd_s6-supply
> +- vdd_s7-supply
> +- vdd_s8-supply
> +- vdd_s9-supply
> +- vdd_s10-supply
> +- vdd_s11-supply
> +- vdd_s12-supply
> +- vdd_s13-supply
> +- vdd_l1_l27-supply
> +- vdd_l2_l8_l17-supply
> +- vdd_l3_l11-supply
> +- vdd_l4_l5-supply
> +- vdd_l6-supply
> +- vdd_l7_l12_l14_l15-supply
> +- vdd_l9-supply
> +- vdd_l10_l23_l25-supply
> +- vdd_l13_l19_l21-supply
> +- vdd_l16_l28-supply
> +- vdd_l18_l22-supply
> +- vdd_l20_l24-supply
> +- vdd_l26-supply
> +- vdd_lvs1_lvs2-supply
> +- vdd_lvs1_lvs2-supply
> + Usage: optional (PM8998 only)
> + Value type: <phandle>
> + Definition: phandle of the parent supply regulator of one or more of the
> + regulators for this PMIC.
> +
> +- vdd_bob-supply
> + Usage: optional (PMI8998 only)
> + Value type: <phandle>
> + Definition: BOB regulator parent supply phandle
> +
> +- vdd_s1-supply
> +- vdd_s2-supply
> +- vdd_s3-supply
> +- vdd_s4-supply

Listed twice?

> + Usage: optional (PM8005 only)
> + Value type: <phandle>
> + Definition: phandle of the parent supply regulator of one or more of the
> + regulators for this PMIC.
> +
> +===============================
> +Second Level Nodes - Regulators
> +===============================
> +
> +- qcom,regulator-initial-voltage
> + Usage: optional; VRM regulators only
> + Value type: <u32>
> + Definition: Specifies the initial voltage in microvolts to request for a
> + VRM regulator.
> +
> +- regulator-initial-mode

Vendor prefix?

> + Usage: optional; VRM regulators only
> + Value type: <u32>
> + Definition: Specifies the initial mode to request for a VRM regulator.
> + Supported values are RPMH_REGULATOR_MODE_* which are defined
> + in [1] (i.e. 0 to 3). This property may be specified even
> + if the regulator-allow-set-load property is not specified.
> +
> +- qcom,allowed-drms-modes
> + Usage: required if regulator-allow-set-load is specified;
> + VRM regulators only
> + Value type: <prop-encoded-array>
> + Definition: A list of integers specifying the PMIC regulator modes which
> + can be configured at runtime based upon consumer load needs.
> + Supported values are RPMH_REGULATOR_MODE_* which are defined
> + in [1] (i.e. 0 to 3).
> +
> +- qcom,drms-mode-threshold-currents
> + Usage: required if regulator-allow-set-load is specified;
> + VRM regulators only
> + Value type: <prop-encoded-array>
> + Definition: A list of integers specifying the maximum allowed load
> + current in microamps for each of the modes listed in
> + qcom,allowed-drms-modes (matched 1-to-1 in order). Elements
> + must be specified in order from lowest to highest value.
> +
> +- qcom,headroom-voltage
> + Usage: optional; VRM regulators only
> + Value type: <u32>
> + Definition: Specifies the headroom voltage in microvolts to request for
> + a VRM regulator. RPMh hardware automatically ensures that
> + the parent of this regulator outputs a voltage high enough
> + to satisfy the requested headroom. Supported values are
> + 0 to 511000.
> +
> +- qcom,always-wait-for-ack
> + Usage: optional
> + Value type: <empty>
> + Definition: Boolean flag which indicates that the application processor
> + must wait for an ACK or a NACK from RPMh for every request
> + sent for this regulator including those which are for a
> + strictly lower power state.
> +
> +Other properties defined in Documentation/devicetree/bindings/regulator.txt
> +may also be used.
> +
> +[1] include/dt-bindings/regulator/qcom,rpmh-regulator.h
> +
> +========
> +Examples
> +========
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +&apps_rsc {
> + pm8998-rpmh-regulators {
> + compatible = "qcom,pm8998-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd_l7_l12_l14_l15-supply = <&pm8998_s5>;
> +
> + smps2 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + qcom,regulator-initial-voltage = <1100000>;
> + };
> +
> + pm8998_s5: smps5 {
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2040000>;
> + qcom,regulator-initial-voltage = <1904000>;
> + };
> +
> + ldo7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,regulator-initial-voltage = <1800000>;
> + qcom,headroom-voltage = <56000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + qcom,allowed-drms-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + qcom,drms-mode-threshold-currents = <10000 1000000>;
> + };
> +
> + lvs1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + };
> +
> + pmi8998-rpmh-regulators {
> + compatible = "qcom,pmi8998-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + bob {
> + regulator-min-microvolt = <3312000>;
> + regulator-max-microvolt = <3600000>;
> + qcom,regulator-initial-voltage = <3312000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> + };
> + };
> +};
> diff --git a/include/dt-bindings/regulator/qcom,rpmh-regulator.h b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
> new file mode 100644
> index 0000000..4378c4b
> --- /dev/null
> +++ b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
> +
> +#ifndef __QCOM_RPMH_REGULATOR_H
> +#define __QCOM_RPMH_REGULATOR_H
> +
> +/*
> + * These mode constants may be used for regulator-initial-mode and
> + * qcom,allowed-drms-modes properties of an RPMh regulator device tree node.
> + * Each type of regulator supports a subset of the possible modes.
> + *
> + * %RPMH_REGULATOR_MODE_RET: Retention mode in which only an extremely small
> + * load current is allowed. This mode is supported
> + * by LDO and SMPS type regulators.
> + * %RPMH_REGULATOR_MODE_LPM: Low power mode in which a small load current is
> + * allowed. This mode corresponds to PFM for SMPS
> + * and BOB type regulators. This mode is supported
> + * by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type
> + * regulators.
> + * %RPMH_REGULATOR_MODE_AUTO: Auto mode in which the regulator hardware
> + * automatically switches between LPM and HPM based
> + * upon the real-time load current. This mode is
> + * supported by HFSMPS, BOB, and PMIC4 FTSMPS type
> + * regulators.
> + * %RPMH_REGULATOR_MODE_HPM: High power mode in which the full rated current
> + * of the regulator is allowed. This mode
> + * corresponds to PWM for SMPS and BOB type
> + * regulators. This mode is supported by all types
> + * of regulators.
> + */
> +#define RPMH_REGULATOR_MODE_RET 0
> +#define RPMH_REGULATOR_MODE_LPM 1
> +#define RPMH_REGULATOR_MODE_AUTO 2
> +#define RPMH_REGULATOR_MODE_HPM 3
> +
> +#endif
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2018-04-16 22:58    [W:0.132 / U:0.980 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site