[lkml]   [2018]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 4/8] dma-buf: add peer2peer flag
On Tue, Apr 03, 2018 at 08:08:32PM +0200, Daniel Vetter wrote:
> I did not mean you should dma_map_sg/page. I just meant that using
> dma_map_resource to fill only the dma address part of the sg table seems
> perfectly sufficient.

But that is not how the interface work, especially facing sg_dma_len.

> Assuming you get an sg table that's been mapping by calling dma_map_sg was
> always a bit a case of bending the abstraction to avoid typing code. The
> only thing an importer ever should have done is look at the dma addresses
> in that sg table, nothing else.

The scatterlist is not a very good abstraction unfortunately, but it
it is spread all over the kernel. And we do expect that anyone who
gets passed a scatterlist can use sg_page() or sg_virt() (which calls
sg_page()) on it. Your changes would break that, and will cause major
trouble because of that.

If you want to expose p2p memory returned from dma_map_resource in
dmabuf do not use scatterlists for this please, but with a new interface
that explicitly passes a virtual address, a dma address and a length
and make it very clear that virt_to_page will not work on the virtual

 \ /
  Last update: 2018-04-16 14:40    [W:0.103 / U:0.768 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site