lkml.org 
[lkml]   [2018]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 14/14] staging: iio: Remove ad7746 from staging
On Fri, 13 Apr 2018 13:36:51 -0300
Hernán Gonzalez <hernan@vanguardiasur.com.ar> wrote:

> Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Please have a single patch (with move detection turned off) for this and the
previous.

Allows easy review by showing us the code but doesn't lead to a stage in which
two different versions will build and hence probably break bisectiblity.

Jonathan

> ---
> .../devicetree/bindings/staging/iio/cdc/ad7746.txt | 34 -
> drivers/staging/iio/cdc/Kconfig | 10 -
> drivers/staging/iio/cdc/Makefile | 1 -
> drivers/staging/iio/cdc/ad7746.c | 856 ---------------------
> drivers/staging/iio/cdc/ad7746.h | 24 -
> 5 files changed, 925 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
> delete mode 100644 drivers/staging/iio/cdc/ad7746.c
> delete mode 100644 drivers/staging/iio/cdc/ad7746.h
>
> diff --git a/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt b/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
> deleted file mode 100644
> index 7740f05..0000000
> --- a/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Analog Devices AD7746/5/7 capacitive sensor driver
> -
> -Required properties:
> - - compatible: Should be one of
> - * "adi,ad7745"
> - * "adi,ad7746"
> - * "adi,ad7747"
> - - reg: The 7-bits long I2c address of the device
> -
> -Optional properties:
> - - adi,exclvl: This property defines the excitation voltage level for the
> - capacitance to be measured. Possible values are:
> - * 0 = +-VDD/8
> - * 1 = +-VDD/4
> - * 2 = +-VDD * 3/8
> - * 3 = +-VDD/2 (Default)
> - - adi,nexca_en: Invert excitation output A.
> - - adi,nexcb_en: Invert excitation output B.
> -
> -Example:
> -Here exclvl would be 1 (VDD/4), Excitation pin A would be inverted and
> -Excitation pin B would NOT be inverted.
> -
> -i2c2 {
> -
> - < . . . >
> -
> - ad7746: ad7746@60 {
> - compatible = "ad7746";
> - reg = <0x60>;
> - adi,exclvl = <1>;
> - adi,nexca_en;
> - };
> -};
> diff --git a/drivers/staging/iio/cdc/Kconfig b/drivers/staging/iio/cdc/Kconfig
> index 80211df..a170ab3 100644
> --- a/drivers/staging/iio/cdc/Kconfig
> +++ b/drivers/staging/iio/cdc/Kconfig
> @@ -23,14 +23,4 @@ config AD7152
> To compile this driver as a module, choose M here: the
> module will be called ad7152.
>
> -config AD7746
> - tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
> - depends on I2C
> - help
> - Say yes here to build support for Analog Devices capacitive sensors.
> - (AD7745, AD7746, AD7747) Provides direct access via sysfs.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called ad7746.
> -
> endmenu
> diff --git a/drivers/staging/iio/cdc/Makefile b/drivers/staging/iio/cdc/Makefile
> index a5fbabf..5db1acd 100644
> --- a/drivers/staging/iio/cdc/Makefile
> +++ b/drivers/staging/iio/cdc/Makefile
> @@ -4,4 +4,3 @@
>
> obj-$(CONFIG_AD7150) += ad7150.o
> obj-$(CONFIG_AD7152) += ad7152.o
> -obj-$(CONFIG_AD7746) += ad7746.o
> diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> deleted file mode 100644
> index ef0ebb5..0000000
> --- a/drivers/staging/iio/cdc/ad7746.c
> +++ /dev/null
> @@ -1,856 +0,0 @@
> -/*
> - * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
> - *
> - * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#include <linux/delay.h>
> -#include <linux/device.h>
> -#include <linux/i2c.h>
> -#include <linux/interrupt.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/slab.h>
> -#include <linux/stat.h>
> -#include <linux/sysfs.h>
> -
> -#include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> -
> -#include "ad7746.h"
> -
> -/*
> - * AD7746 Register Definition
> - */
> -
> -#define AD7746_REG_CAP_DATA_HIGH 1
> -#define AD7746_REG_VT_DATA_HIGH 4
> -#define AD7746_REG_CAP_SETUP 7
> -#define AD7746_REG_VT_SETUP 8
> -#define AD7746_REG_EXC_SETUP 9
> -#define AD7746_REG_CFG 10
> -#define AD7746_REG_CAPDACA 11
> -#define AD7746_REG_CAPDACB 12
> -#define AD7746_REG_CAP_OFFH 13
> -#define AD7746_REG_CAP_GAINH 15
> -#define AD7746_REG_VOLT_GAINH 17
> -
> -/* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
> -#define AD7746_CAPSETUP_CAPEN BIT(7)
> -#define AD7746_CAPSETUP_CIN2 BIT(6) /* AD7746 only */
> -#define AD7746_CAPSETUP_CAPDIFF BIT(5)
> -#define AD7746_CAPSETUP_CACHOP BIT(0)
> -
> -/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
> -#define AD7746_VTSETUP_VTEN (1 << 7)
> -#define AD7746_VTSETUP_VTMD_INT_TEMP (0 << 5)
> -#define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5)
> -#define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5)
> -#define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5)
> -#define AD7746_VTSETUP_EXTREF BIT(4)
> -#define AD7746_VTSETUP_VTSHORT BIT(1)
> -#define AD7746_VTSETUP_VTCHOP BIT(0)
> -
> -/* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
> -#define AD7746_EXCSETUP_CLKCTRL BIT(7)
> -#define AD7746_EXCSETUP_EXCON BIT(6)
> -#define AD7746_EXCSETUP_EXCB BIT(5)
> -#define AD7746_EXCSETUP_NEXCB BIT(4)
> -#define AD7746_EXCSETUP_EXCA BIT(3)
> -#define AD7746_EXCSETUP_NEXCA BIT(2)
> -#define AD7746_EXCSETUP_EXCLVL(x) (((x) & 0x3) << 0)
> -
> -/* Config Register Bit Designations (AD7746_REG_CFG) */
> -#define AD7746_CONF_VTFS_SHIFT 6
> -#define AD7746_CONF_CAPFS_SHIFT 3
> -#define AD7746_CONF_VTFS_MASK GENMASK(7, 6)
> -#define AD7746_CONF_CAPFS_MASK GENMASK(5, 3)
> -#define AD7746_CONF_MODE_IDLE (0 << 0)
> -#define AD7746_CONF_MODE_CONT_CONV (1 << 0)
> -#define AD7746_CONF_MODE_SINGLE_CONV (2 << 0)
> -#define AD7746_CONF_MODE_PWRDN (3 << 0)
> -#define AD7746_CONF_MODE_OFFS_CAL (5 << 0)
> -#define AD7746_CONF_MODE_GAIN_CAL (6 << 0)
> -
> -/* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
> -#define AD7746_CAPDAC_DACEN BIT(7)
> -#define AD7746_CAPDAC_DACP(x) ((x) & 0x7F)
> -
> -/*
> - * struct ad7746_chip_info - chip specific information
> - */
> -
> -struct ad7746_chip_info {
> - struct i2c_client *client;
> - struct mutex lock; /* protect sensor state */
> - /*
> - * Capacitive channel digital filter setup;
> - * conversion time/update rate setup per channel
> - */
> - u8 config;
> - u8 cap_setup;
> - u8 vt_setup;
> - u8 capdac[2][2];
> - s8 capdac_set;
> -
> - union {
> - __be32 d32;
> - u8 d8[4];
> - } data ____cacheline_aligned;
> -};
> -
> -enum ad7746_chan {
> - VIN,
> - VIN_VDD,
> - TEMP_INT,
> - TEMP_EXT,
> - CIN1,
> - CIN1_DIFF,
> - CIN2,
> - CIN2_DIFF,
> -};
> -
> -static const struct iio_chan_spec ad7746_channels[] = {
> - [VIN] = {
> - .type = IIO_VOLTAGE,
> - .indexed = 1,
> - .channel = 0,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> - BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .address = AD7746_REG_VT_DATA_HIGH << 8 |
> - AD7746_VTSETUP_VTMD_EXT_VIN,
> - },
> - [VIN_VDD] = {
> - .type = IIO_VOLTAGE,
> - .indexed = 1,
> - .channel = 1,
> - .extend_name = "supply",
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> - BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .address = AD7746_REG_VT_DATA_HIGH << 8 |
> - AD7746_VTSETUP_VTMD_VDD_MON,
> - },
> - [TEMP_INT] = {
> - .type = IIO_TEMP,
> - .indexed = 1,
> - .channel = 0,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> - .address = AD7746_REG_VT_DATA_HIGH << 8 |
> - AD7746_VTSETUP_VTMD_INT_TEMP,
> - },
> - [TEMP_EXT] = {
> - .type = IIO_TEMP,
> - .indexed = 1,
> - .channel = 1,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> - .address = AD7746_REG_VT_DATA_HIGH << 8 |
> - AD7746_VTSETUP_VTMD_EXT_TEMP,
> - },
> - [CIN1] = {
> - .type = IIO_CAPACITANCE,
> - .indexed = 1,
> - .channel = 0,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
> - BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .address = AD7746_REG_CAP_DATA_HIGH << 8,
> - },
> - [CIN1_DIFF] = {
> - .type = IIO_CAPACITANCE,
> - .differential = 1,
> - .indexed = 1,
> - .channel = 0,
> - .channel2 = 2,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
> - BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .address = AD7746_REG_CAP_DATA_HIGH << 8 |
> - AD7746_CAPSETUP_CAPDIFF
> - },
> - [CIN2] = {
> - .type = IIO_CAPACITANCE,
> - .indexed = 1,
> - .channel = 1,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
> - BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .address = AD7746_REG_CAP_DATA_HIGH << 8 |
> - AD7746_CAPSETUP_CIN2,
> - },
> - [CIN2_DIFF] = {
> - .type = IIO_CAPACITANCE,
> - .differential = 1,
> - .indexed = 1,
> - .channel = 1,
> - .channel2 = 3,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
> - BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .address = AD7746_REG_CAP_DATA_HIGH << 8 |
> - AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2,
> - }
> -};
> -
> -/* Values are Update Rate (Hz), Conversion Time (ms) + 1*/
> -static const unsigned char ad7746_vt_filter_rate_table[][2] = {
> - {50, 20 + 1}, {31, 32 + 1}, {16, 62 + 1}, {8, 122 + 1},
> -};
> -
> -static const unsigned char ad7746_cap_filter_rate_table[][2] = {
> - {91, 11 + 1}, {84, 12 + 1}, {50, 20 + 1}, {26, 38 + 1},
> - {16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1},
> -};
> -
> -static int ad7746_select_channel(struct iio_dev *indio_dev,
> - struct iio_chan_spec const *chan)
> -{
> - struct ad7746_chip_info *chip = iio_priv(indio_dev);
> - u8 vt_setup, cap_setup;
> - int ret, delay, idx;
> -
> - switch (chan->type) {
> - case IIO_CAPACITANCE:
> - cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN;
> - vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN;
> - idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
> - AD7746_CONF_CAPFS_SHIFT;
> - delay = ad7746_cap_filter_rate_table[idx][1];
> -
> - if (chip->capdac_set != chan->channel) {
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_CAPDACA,
> - chip->capdac[chan->channel][0]);
> - if (ret < 0)
> - return ret;
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_CAPDACB,
> - chip->capdac[chan->channel][1]);
> - if (ret < 0)
> - return ret;
> -
> - chip->capdac_set = chan->channel;
> - }
> - break;
> - case IIO_VOLTAGE:
> - case IIO_TEMP:
> - vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN;
> - cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN;
> - idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
> - AD7746_CONF_VTFS_SHIFT;
> - delay = ad7746_cap_filter_rate_table[idx][1];
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - if (chip->cap_setup != cap_setup) {
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_CAP_SETUP,
> - cap_setup);
> - if (ret < 0)
> - return ret;
> -
> - chip->cap_setup = cap_setup;
> - }
> -
> - if (chip->vt_setup != vt_setup) {
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_VT_SETUP,
> - vt_setup);
> - if (ret < 0)
> - return ret;
> -
> - chip->vt_setup = vt_setup;
> - }
> -
> - return delay;
> -}
> -
> -static inline ssize_t ad7746_start_calib(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t len,
> - u8 regval)
> -{
> - struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> - struct ad7746_chip_info *chip = iio_priv(indio_dev);
> - int ret, timeout = 10;
> - bool doit;
> -
> - ret = strtobool(buf, &doit);
> - if (ret < 0)
> - return ret;
> -
> - if (!doit)
> - return 0;
> -
> - mutex_lock(&chip->lock);
> - regval |= chip->config;
> - ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
> - if (ret < 0)
> - goto unlock;
> -
> - do {
> - msleep(20);
> - ret = i2c_smbus_read_byte_data(chip->client, AD7746_REG_CFG);
> - if (ret < 0)
> - goto unlock;
> -
> - } while ((ret == regval) && timeout--);
> -
> - mutex_unlock(&chip->lock);
> -
> - return len;
> -
> -unlock:
> - mutex_unlock(&chip->lock);
> - return ret;
> -}
> -
> -static ssize_t ad7746_start_offset_calib(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t len)
> -{
> - struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> - int ret = ad7746_select_channel(indio_dev,
> - &ad7746_channels[to_iio_dev_attr(attr)->address]);
> - if (ret < 0)
> - return ret;
> -
> - return ad7746_start_calib(dev, attr, buf, len,
> - AD7746_CONF_MODE_OFFS_CAL);
> -}
> -
> -static ssize_t ad7746_start_gain_calib(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t len)
> -{
> - struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> - int ret = ad7746_select_channel(indio_dev,
> - &ad7746_channels[to_iio_dev_attr(attr)->address]);
> - if (ret < 0)
> - return ret;
> -
> - return ad7746_start_calib(dev, attr, buf, len,
> - AD7746_CONF_MODE_GAIN_CAL);
> -}
> -
> -static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration,
> - 0200, NULL, ad7746_start_offset_calib, CIN1);
> -static IIO_DEVICE_ATTR(in_capacitance1_calibbias_calibration,
> - 0200, NULL, ad7746_start_offset_calib, CIN2);
> -static IIO_DEVICE_ATTR(in_capacitance0_calibscale_calibration,
> - 0200, NULL, ad7746_start_gain_calib, CIN1);
> -static IIO_DEVICE_ATTR(in_capacitance1_calibscale_calibration,
> - 0200, NULL, ad7746_start_gain_calib, CIN2);
> -static IIO_DEVICE_ATTR(in_voltage0_calibscale_calibration,
> - 0200, NULL, ad7746_start_gain_calib, VIN);
> -
> -static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip,
> - int val)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(ad7746_cap_filter_rate_table); i++)
> - if (val >= ad7746_cap_filter_rate_table[i][0])
> - break;
> -
> - if (i >= ARRAY_SIZE(ad7746_cap_filter_rate_table))
> - i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1;
> -
> - chip->config &= ~AD7746_CONF_CAPFS_MASK;
> - chip->config |= i << AD7746_CONF_CAPFS_SHIFT;
> -
> - return 0;
> -}
> -
> -static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip,
> - int val)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(ad7746_vt_filter_rate_table); i++)
> - if (val >= ad7746_vt_filter_rate_table[i][0])
> - break;
> -
> - if (i >= ARRAY_SIZE(ad7746_vt_filter_rate_table))
> - i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1;
> -
> - chip->config &= ~AD7746_CONF_VTFS_MASK;
> - chip->config |= i << AD7746_CONF_VTFS_SHIFT;
> -
> - return 0;
> -}
> -
> -static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8");
> -static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available,
> - "91 84 50 26 16 13 11 9");
> -
> -static struct attribute *ad7746_attributes[] = {
> - &iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr,
> - &iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr,
> - &iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr,
> - &iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr,
> - &iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr,
> - &iio_const_attr_in_voltage_sampling_frequency_available.dev_attr.attr,
> - &iio_const_attr_in_capacitance_sampling_frequency_available.dev_attr.attr,
> - NULL,
> -};
> -
> -static const struct attribute_group ad7746_attribute_group = {
> - .attrs = ad7746_attributes,
> -};
> -
> -static int ad7746_write_raw(struct iio_dev *indio_dev,
> - struct iio_chan_spec const *chan,
> - int val,
> - int val2,
> - long mask)
> -{
> - struct ad7746_chip_info *chip = iio_priv(indio_dev);
> - int ret, reg;
> -
> - mutex_lock(&chip->lock);
> -
> - switch (mask) {
> - case IIO_CHAN_INFO_CALIBSCALE:
> - if (val != 1) {
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - /* 2^16 in micro */
> - val = (val2 * 1024) / 15625;
> -
> - switch (chan->type) {
> - case IIO_CAPACITANCE:
> - reg = AD7746_REG_CAP_GAINH;
> - break;
> - case IIO_VOLTAGE:
> - reg = AD7746_REG_VOLT_GAINH;
> - break;
> - default:
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - ret = i2c_smbus_write_word_swapped(chip->client, reg, val);
> - if (ret < 0)
> - goto out;
> -
> - ret = 0;
> - break;
> - case IIO_CHAN_INFO_CALIBBIAS:
> - if (val < 0 || val > 0xFFFF) {
> - ret = -EINVAL;
> - goto out;
> - }
> - ret = i2c_smbus_write_word_swapped(chip->client,
> - AD7746_REG_CAP_OFFH, val);
> - if (ret < 0)
> - goto out;
> -
> - ret = 0;
> - break;
> - case IIO_CHAN_INFO_OFFSET:
> - if (val < 0 || val > 43008000) { /* 21pF */
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - /*
> - * CAPDAC Scale = 21pF_typ / 127
> - * CIN Scale = 8.192pF / 2^24
> - * Offset Scale = CAPDAC Scale / CIN Scale = 338646
> - */
> -
> - val /= 338646;
> -
> - chip->capdac[chan->channel][chan->differential] = val > 0 ?
> - AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0;
> -
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_CAPDACA,
> - chip->capdac[chan->channel][0]);
> - if (ret < 0)
> - goto out;
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_CAPDACB,
> - chip->capdac[chan->channel][1]);
> - if (ret < 0)
> - goto out;
> -
> - chip->capdac_set = chan->channel;
> -
> - ret = 0;
> - break;
> - case IIO_CHAN_INFO_SAMP_FREQ:
> - if (val2) {
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - switch (chan->type) {
> - case IIO_CAPACITANCE:
> - ret = ad7746_store_cap_filter_rate_setup(chip, val);
> - break;
> - case IIO_VOLTAGE:
> - ret = ad7746_store_vt_filter_rate_setup(chip, val);
> - break;
> - default:
> - ret = -EINVAL;
> - }
> - break;
> - default:
> - ret = -EINVAL;
> - }
> -
> -out:
> - mutex_unlock(&chip->lock);
> - return ret;
> -}
> -
> -static int ad7746_read_raw(struct iio_dev *indio_dev,
> - struct iio_chan_spec const *chan,
> - int *val, int *val2,
> - long mask)
> -{
> - struct ad7746_chip_info *chip = iio_priv(indio_dev);
> - int ret, delay, idx;
> - u8 regval, reg;
> -
> - mutex_lock(&chip->lock);
> -
> - switch (mask) {
> - case IIO_CHAN_INFO_RAW:
> - case IIO_CHAN_INFO_PROCESSED:
> - ret = ad7746_select_channel(indio_dev, chan);
> - if (ret < 0)
> - goto out;
> - delay = ret;
> -
> - regval = chip->config | AD7746_CONF_MODE_SINGLE_CONV;
> - ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG,
> - regval);
> - if (ret < 0)
> - goto out;
> -
> - msleep(delay);
> - /* Now read the actual register */
> -
> - ret = i2c_smbus_read_i2c_block_data(chip->client,
> - chan->address >> 8, 3,
> - &chip->data.d8[1]);
> -
> - if (ret < 0)
> - goto out;
> -
> - /*
> - * Either for Capacitance, Voltage or Temperature,
> - * the 0x000000 code represents negative full scale,
> - * the 0x800000 code represents zero scale, and
> - * the 0xFFFFFF code represents positive full scale.
> - */
> -
> - *val = (be32_to_cpu(chip->data.d32) & 0xFFFFFF) - 0x800000;
> -
> - switch (chan->type) {
> - case IIO_TEMP:
> - /*
> - * temperature in milli degrees Celsius
> - * T = ((*val / 2048) - 4096) * 1000
> - */
> - *val = (*val * 125) / 256;
> - break;
> - case IIO_VOLTAGE:
> -
> - /*
> - * The voltage from the VDD pin is internally
> - * attenuated by 6.
> - */
> -
> - if (chan->channel == 1) /* supply_raw */
> - *val = *val * 6;
> - break;
> - default:
> - break;
> - }
> -
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_CHAN_INFO_CALIBSCALE:
> - switch (chan->type) {
> - case IIO_CAPACITANCE:
> - reg = AD7746_REG_CAP_GAINH;
> - break;
> - case IIO_VOLTAGE:
> - reg = AD7746_REG_VOLT_GAINH;
> - break;
> - default:
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - ret = i2c_smbus_read_word_swapped(chip->client, reg);
> - if (ret < 0)
> - goto out;
> - /* 1 + gain_val / 2^16 */
> - *val = 1;
> - *val2 = (15625 * ret) / 1024;
> -
> - ret = IIO_VAL_INT_PLUS_MICRO;
> - break;
> - case IIO_CHAN_INFO_CALIBBIAS:
> - ret = i2c_smbus_read_word_swapped(chip->client,
> - AD7746_REG_CAP_OFFH);
> - if (ret < 0)
> - goto out;
> - *val = ret;
> -
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_CHAN_INFO_OFFSET:
> -
> - /*
> - * CAPDAC Scale = 21pF_typ / 127
> - * CIN Scale = 8.192pF / 2^24
> - * Offset Scale = CAPDAC Scale / CIN Scale = 338646
> - */
> -
> - *val = AD7746_CAPDAC_DACP(chip->capdac[chan->channel]
> - [chan->differential]) * 338646;
> -
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_CHAN_INFO_SCALE:
> - switch (chan->type) {
> - case IIO_CAPACITANCE:
> - /* CIN Scale: 8.192pf / 2^24 */
> - *val = 0;
> - *val2 = 488;
> - ret = IIO_VAL_INT_PLUS_NANO;
> - break;
> - case IIO_VOLTAGE:
> - /* VIN Scale: 1170mV / 2^23 */
> - *val = 1170;
> - *val2 = 23;
> - ret = IIO_VAL_FRACTIONAL_LOG2;
> - break;
> - default:
> - ret = -EINVAL;
> - break;
> - }
> -
> - break;
> - case IIO_CHAN_INFO_SAMP_FREQ:
> - switch (chan->type) {
> - case IIO_CAPACITANCE:
> - idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
> - AD7746_CONF_CAPFS_SHIFT;
> - *val = ad7746_cap_filter_rate_table[idx][0];
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_VOLTAGE:
> - idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
> - AD7746_CONF_VTFS_SHIFT;
> - *val = ad7746_vt_filter_rate_table[idx][0];
> - ret = IIO_VAL_INT;
> - break;
> - default:
> - ret = -EINVAL;
> - }
> - break;
> - default:
> - ret = -EINVAL;
> - }
> -out:
> - mutex_unlock(&chip->lock);
> - return ret;
> -}
> -
> -static const struct iio_info ad7746_info = {
> - .attrs = &ad7746_attribute_group,
> - .read_raw = ad7746_read_raw,
> - .write_raw = ad7746_write_raw,
> -};
> -
> -/*
> - * device probe and remove
> - */
> -#ifdef CONFIG_OF
> -static struct ad7746_platform_data *ad7746_parse_dt(struct device *dev)
> -{
> - struct device_node *np = dev->of_node;
> - struct ad7746_platform_data *pdata;
> - unsigned int tmp;
> - int ret;
> -
> - /*
> - * The default excitation outputs are not inverted, it should be stated
> - * in the dt if needed.
> - */
> -
> - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> - if (!pdata)
> - return NULL;
> -
> - ret = of_property_read_u32(np, "adi,exclvl", &tmp);
> - if (ret || tmp > 3) {
> - dev_warn(dev, "Wrong exclvl value, using default\n");
> - pdata->exclvl = 3;
> - } else {
> - pdata->exclvl = tmp;
> - }
> -
> - pdata->exca_en = true;
> - pdata->excb_en = true;
> - pdata->exca_inv_en = of_property_read_bool(np, "adi,nexca_en");
> - pdata->excb_inv_en = of_property_read_bool(np, "adi,nexcb_en");
> -
> - return pdata;
> -}
> -#else
> -static struct ad7746_platform_data *ad7746_parse_dt(struct device *dev)
> -{
> - return NULL;
> -}
> -#endif
> -
> -static int ad7746_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> -{
> - struct ad7746_platform_data *pdata = client->dev.platform_data;
> - struct ad7746_chip_info *chip;
> - struct iio_dev *indio_dev;
> - unsigned char regval = 0;
> - int ret = 0;
> -
> - if (client->dev.of_node)
> - pdata = ad7746_parse_dt(&client->dev);
> - else
> - pdata = client->dev.platform_data;
> -
> - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> - if (!indio_dev)
> - return -ENOMEM;
> - chip = iio_priv(indio_dev);
> - mutex_init(&chip->lock);
> - /* this is only used for device removal purposes */
> - i2c_set_clientdata(client, indio_dev);
> -
> - chip->client = client;
> - chip->capdac_set = -1;
> -
> - /* Establish that the iio_dev is a child of the i2c device */
> - indio_dev->name = id->name;
> - indio_dev->dev.parent = &client->dev;
> - indio_dev->info = &ad7746_info;
> - indio_dev->channels = ad7746_channels;
> - if (id->driver_data == 7746)
> - indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
> - else
> - indio_dev->num_channels = ARRAY_SIZE(ad7746_channels) - 2;
> - indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
> - indio_dev->modes = INDIO_DIRECT_MODE;
> -
> - if (pdata) {
> - if (pdata->exca_en) {
> - if (pdata->exca_inv_en)
> - regval |= AD7746_EXCSETUP_NEXCA;
> - else
> - regval |= AD7746_EXCSETUP_EXCA;
> - }
> -
> - if (pdata->excb_en) {
> - if (pdata->excb_inv_en)
> - regval |= AD7746_EXCSETUP_NEXCB;
> - else
> - regval |= AD7746_EXCSETUP_EXCB;
> - }
> -
> - regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
> - } else {
> - dev_warn(&client->dev, "No platform data? using default\n");
> - regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
> - AD7746_EXCSETUP_EXCLVL(3);
> - }
> -
> - ret = i2c_smbus_write_byte_data(chip->client,
> - AD7746_REG_EXC_SETUP, regval);
> - if (ret < 0)
> - return ret;
> -
> - ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
> - if (ret)
> - return ret;
> -
> - return 0;
> -}
> -
> -static int ad7746_remove(struct i2c_client *client)
> -{
> - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> - struct ad7746_chip_info *chip = iio_priv(indio_dev);
> - unsigned char regval;
> - int ret;
> -
> - mutex_lock(&chip->lock);
> -
> - regval = chip->config | AD7746_CONF_MODE_PWRDN;
> - ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
> -
> - mutex_unlock(&chip->lock);
> -
> - if (ret < 0) {
> - dev_warn(&client->dev, "Could NOT Power Down!\n");
> - goto out;
> - }
> -
> - iio_device_unregister(indio_dev);
> -
> -out:
> - return ret;
> -}
> -
> -static const struct i2c_device_id ad7746_id[] = {
> - { "ad7745", 7745 },
> - { "ad7746", 7746 },
> - { "ad7747", 7747 },
> - {}
> -};
> -MODULE_DEVICE_TABLE(i2c, ad7746_id);
> -
> -#ifdef CONFIG_OF
> -static const struct of_device_id ad7746_of_match[] = {
> - { .compatible = "adi,ad7745" },
> - { .compatible = "adi,ad7746" },
> - { .compatible = "adi,ad7747" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, ad7746_of_match);
> -#endif
> -
> -static struct i2c_driver ad7746_driver = {
> - .driver = {
> - .name = KBUILD_MODNAME,
> - .of_match_table = of_match_ptr(ad7746_of_match),
> - },
> - .probe = ad7746_probe,
> - .remove = ad7746_remove,
> - .id_table = ad7746_id,
> -};
> -module_i2c_driver(ad7746_driver);
> -
> -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
> -MODULE_DESCRIPTION("Analog Devices AD7746/5/7 capacitive sensor driver");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
> deleted file mode 100644
> index 2fbcee8..0000000
> --- a/drivers/staging/iio/cdc/ad7746.h
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -/*
> - * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
> - *
> - * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#ifndef IIO_CDC_AD7746_H_
> -#define IIO_CDC_AD7746_H_
> -
> -/*
> - * TODO: struct ad7746_platform_data needs to go into include/linux/iio
> - */
> -
> -struct ad7746_platform_data {
> - unsigned char exclvl; /*Excitation Voltage Level */
> - bool exca_en; /* enables EXCA pin as the excitation output */
> - bool exca_inv_en; /* enables /EXCA pin as the excitation output */
> - bool excb_en; /* enables EXCB pin as the excitation output */
> - bool excb_inv_en; /* enables /EXCB pin as the excitation output */
> -};
> -
> -#endif /* IIO_CDC_AD7746_H_ */

\
 
 \ /
  Last update: 2018-04-15 17:44    [W:0.224 / U:4.484 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site