lkml.org 
[lkml]   [2018]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/2] iio: add unit converter
On Wed, 11 Apr 2018 16:15:53 +0200
Peter Rosin <peda@axentia.se> wrote:

> Hi!
>
> I'm now following up with one more binding for the unit-converter.
> This time with a real IC, namely LT6106 from Analog Devices. It's
> a current sense amplifier. I was a but unsure if I should have
> the Rin and Rout resistors in the binding or if I instead should
> have used the "gain". In the end I went with the resistors since
> while the normal case is an integer gain, that may not always be
> the case. And when it's not, that could get tricky. But I'm open
> for arguments on that.
>
> Cheers,
> Peter
Trivial complaint of the day - why the same title for this email
as the previous series? Had me really confused for a minute ;)

Seems like the whole driver is stabilizing. If we do a v4 please
pull the whole lot into one series.

Jonathan

>
> Peter Rosin (2):
> dt-bindings: iio: afe: add binding for adi,lt6106
> iio: afe: unit-converter: add support for adi,lt6106
>
> .../devicetree/bindings/iio/afe/adi,lt6106.txt | 50 ++++++++++++++++++++
> MAINTAINERS | 1 +
> drivers/iio/afe/Kconfig | 3 +-
> drivers/iio/afe/iio-unit-converter.c | 54 ++++++++++++++++++++++
> 4 files changed, 107 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/iio/afe/adi,lt6106.txt
>

\
 
 \ /
  Last update: 2018-04-15 19:42    [W:0.146 / U:5.904 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site