lkml.org 
[lkml]   [2018]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] mmc: wbsd: Replace mdelay with usleep_range in wbsd_init
On 11 April 2018 at 04:46, Jia-Ju Bai <baijiaju1990@gmail.com> wrote:
> wbsd_init() is never called in atomic context.
>
> The call chains ending up at wbsd_init() are:
> [1] wbsd_init() <- wbsd_probe()
> [2] wbsd_init() <- wbsd_pnp_probe()
>
> wbsd_probe() is set as ".probe" in struct platform_driver.
> wbsd_pnp_probe() is set as ".probe" in struct pnp_driver.
> These functions are not called in atomic context.
>
> Despite never getting called from atomic context, wbsd_init()
> calls mdelay() to busily wait.
> This is not necessary and can be replaced with usleep_range() to
> avoid busy waiting.
>
> This is found by a static analysis tool named DCNS written by myself.
> And I also manually check it.
>
> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>

The patch is good, however I think you should squash all three in this
series into one. For obvious reasons.

Kind regards
Uffe

> ---
> drivers/mmc/host/wbsd.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
> index 546aaf8..6224d12 100644
> --- a/drivers/mmc/host/wbsd.c
> +++ b/drivers/mmc/host/wbsd.c
> @@ -1709,7 +1709,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
> /*
> * Allow device to initialise itself properly.
> */
> - mdelay(5);
> + usleep_range(5000, 6000);
>
> /*
> * Reset the chip into a known state.
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2018-04-11 17:05    [W:0.115 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site