lkml.org 
[lkml]   [2018]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: zynqmp: Use serdev for zcu100 BT
Date
Mainline started to use serdev interface for uart attached devices.
Change description to reflect it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 3e862a9faf26..c7f713c8e69e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -89,12 +89,6 @@
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
-
- bt_power {
- label = "bt_power";
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
};

wmmcsdio_fixed: fixedregulator-mmcsdio {
@@ -267,6 +261,10 @@

&uart0 {
status = "okay";
+ bluetooth {
+ compatible = "ti,wl1831-st";
+ enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
};

&uart1 {
--
2.17.0
\
 
 \ /
  Last update: 2018-04-11 15:16    [W:0.033 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site