lkml.org 
[lkml]   [2018]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] net: can: sja1000: Replace mdelay with usleep_range in pcan_add_channels
Date
pcan_add_channels() is never called in atomic context.

pcan_add_channels() is only called by pcan_probe(), which is only set as
".probe" in struct pcmcia_driver.

Despite never getting called from atomic context, pcan_add_channels()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
---
drivers/net/can/sja1000/peak_pcmcia.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index dd56133..1a1fbf3 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -530,7 +530,7 @@ static int pcan_add_channels(struct pcan_pccard *card)
pcan_write_reg(card, PCC_CCR, ccr);

/* wait 2ms before unresetting channels */
- mdelay(2);
+ usleep_range(2000, 3000);

ccr &= ~PCC_CCR_RST_ALL;
pcan_write_reg(card, PCC_CCR, ccr);
--
1.9.1
\
 
 \ /
  Last update: 2018-04-11 03:45    [W:0.021 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site