lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] pinctrl: bcm2835: Add support for output-low output-high properties
Date
Properties to set initial value of pin output buffer.
This can be useful for configure hardware in overlay files, and in early boot
for checking it states in QA sanity tests.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 010c565..28acd06 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -965,6 +965,11 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
bcm2835_pull_config_set(pc, pin, BCM2835_PUD_UP);
break;

+ /* Set output-high or output-low */
+ case PIN_CONFIG_OUTPUT:
+ bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
+ break;
+
default:
return -EINVAL;

--
2.7.4
\
 
 \ /
  Last update: 2018-03-09 18:16    [W:0.119 / U:29.700 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site