Messages in this thread | | | From | Shawn Guo <> | Subject | [PATCH v5 0/2] Add HiSilicon INNO USB2 PHY driver support | Date | Fri, 9 Mar 2018 22:46:59 +0800 |
| |
It adds device tree bindings and driver support for HiSilicon INNO USB2 PHY device, which can be found on HiSilicon STB SoC Hi3798CV200.
Changes for v5: - Drop "syscon" from perictrl compatible in bindings example, as it's not really required by inno-usb2-phy devices. - Collect Rob's Reviewed-by tag on bindings.
Changes for v4: - Change device tree bindings to define each PHY port as a child node, and therefore instead of adding a custom .of_xlate, we can use of_phy_simple_xlate. Also #phy-cells is 0 now, and consumers can refer to the phy without any number cell in phandle.
Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration register.
Changes for v2: - Move DT bindings into a separate patch. - Rename hisi_inno_phy_start() to hisi_inno_phy_init() for aligning name with .init hook.
Pengcheng Li (2): dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY phy: add inno-usb2-phy driver for hi3798cv200 SoC
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 71 ++++++++ drivers/phy/hisilicon/Kconfig | 10 ++ drivers/phy/hisilicon/Makefile | 1 + drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 +++++++++++++++++++++ 4 files changed, 279 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c
-- 1.9.1
| |