lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] MIPS: pm-cps: Block system suspend when a JTAG probe is present
On Tue, Feb 20, 2018 at 09:58:16AM +0000, Matt Redfearn wrote:
> If a JTAG probe is connected to a MIPS cluster, then the CPC detects it
> and latches the CPC.STAT_CONF.EJTAG_PROBE bit to 1. While set,
> attempting to send a power-down command to a core will be blocked, and
> the CPC will instead send the core to clock-off state. This can
> interfere with systems fully entering a low power state where all
> cores, CM, GIC, etc are powered down.
>
> Detect that a JTAG probe is / has been connected to the cluster and
> block the suspend attempt.
>
> Attempting to suspend the system while a JTAG probe is connected now
> yields:
> # echo mem > /sys/power/state
> [ 11.654000] PM: Syncing filesystems ... done.
> [ 11.658000] JTAG probe is connected - abort suspend
> -sh: echo: write error: Operation not permitted
> #
>
> To restore suspend, the JTAG probe should be disconnected or put into
> quiescent state. Platform code can then clear the
> CPC.STAT_CONF.EJTAG_PROBE bit.
>
> Reported-by: Ed Blake <ed.blake@sondrel.com>
> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>

Thanks, applied for 4.17.

Cheers
James
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-09 14:56    [W:0.039 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site