lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: i.MX25: define SSI FIFO depth
Hi Lothar,

Thus wrote Lothar Waßmann (LW@KARO-electronics.de):

> > diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> > index 9725705..cf70df2 100644
> > --- a/arch/arm/boot/dts/imx25.dtsi
> > +++ b/arch/arm/boot/dts/imx25.dtsi
> > @@ -269,6 +269,7 @@
> > dmas = <&sdma 24 1 0>,
> > <&sdma 25 1 0>;
> > dma-names = "rx", "tx";
> > + fsl,fifo-depth = <15>;
> > status = "disabled";
> > };

> > @@ -329,6 +330,7 @@
> > dmas = <&sdma 28 1 0>,
> > <&sdma 29 1 0>;
> > dma-names = "rx", "tx";
> > + fsl,fifo-depth = <15>;
> > status = "disabled";
> > };

> You are changing the global .dtsi file. Did you test this change with
> all devices that are affected by it?

I changed the hardware description of the imx25 SSI to match the
reference manual.

I did test this change on an imx25 board with audio playback. This uses
the SSI description I modified. I verified that the driver is actually
taking the modified setting into account and that this causes no
problems.

As of today, this setting is used by the fsl_ssi driver to set the fifo
water level for dma requests.

Of course, I don't have access to the enitre range of supported imx25
boards and I don't think this is required for submitting patches.

Do you have any indication why this patch should not be merged?

Best regards,
Martin

\
 
 \ /
  Last update: 2018-03-08 16:39    [W:0.062 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site