lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: tegra: fix pllu rate configuration
On Fri, Feb 23, 2018 at 12:04:51AM +0100, Marcel Ziswiler wrote:
> Turns out latest upstream U-Boot does not configure/enable pllu which
> leaves it at some default rate of 500 kHz:
>
> root@apalis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u
> pll_u 3 3 0 500000 0
>
> Of course this won't quite work leading to the following messages:
>
> [ 6.559593] usb 2-1: new full-speed USB device number 2 using tegra-
> ehci
> [ 11.759173] usb 2-1: device descriptor read/64, error -110
> [ 27.119453] usb 2-1: device descriptor read/64, error -110
> [ 27.389217] usb 2-1: new full-speed USB device number 3 using tegra-
> ehci
> [ 32.559454] usb 2-1: device descriptor read/64, error -110
> [ 47.929777] usb 2-1: device descriptor read/64, error -110
> [ 48.049658] usb usb2-port1: attempt power cycle
> [ 48.759475] usb 2-1: new full-speed USB device number 4 using tegra-
> ehci
> [ 59.349457] usb 2-1: device not accepting address 4, error -110
> [ 59.509449] usb 2-1: new full-speed USB device number 5 using tegra-
> ehci
> [ 70.069457] usb 2-1: device not accepting address 5, error -110
> [ 70.079721] usb usb2-port1: unable to enumerate USB device
>
> Fix this by actually allowing the rate also being set from within
> the Linux kernel.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
> drivers/clk/tegra/clk-pll.c | 2 ++
> 1 file changed, 2 insertions(+)

I'm aware of the discussion about how best to implement this, but this
seems like a reasonable fix until we have something better.

Peter, Jon: if you want to fix this more properly, please take point on
this.

Applied this to for-4.17/clk, thanks.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-08 15:58    [W:0.088 / U:33.384 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site