lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectNokia N900: refcount_t underflow, use after free
Hi!

I'm getting this warning... Has anyone seen/debugged that before?
Unfortunately the backtrace does not seem to be too useful :-(.

Pavel

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.16.0-rc3-next-20180302 (pavel@duo) (gcc
version 4.7.2 (GC
C)) #70 Fri Mar 2 10:16:00 CET 2018
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT
nonaliasing instruction cac
...
[ 1.244140] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
not found, using d
ummy regulator
[ 1.254089] omap3isp 480bc000.isp: Revision 2.0 found
[ 1.260009] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
[ 1.266693] ------------[ cut here ]------------
[ 1.271606] WARNING: CPU: 0 PID: 1 at lib/refcount.c:187
refcount_sub_and_test+0x94/0xa8
[ 1.280181] refcount_t: underflow; use-after-free.
[ 1.285247] Modules linked in:
[ 1.288482] CPU: 0 PID: 1 Comm: swapper Not tainted
4.16.0-rc3-next-20180302 #70
[ 1.296295] Hardware name: Nokia RX-51 board
[ 1.300811] [<c010d6cc>] (unwind_backtrace) from [<c010b560>]
(show_stack+0x10/0x14)
[ 1.309020] [<c010b560>] (show_stack) from [<c0127dec>]
(__warn+0xe8/0x110)
[ 1.316375] [<c0127dec>] (__warn) from [<c0127edc>]
(warn_slowpath_fmt+0x38/0x48)
[ 1.324310] [<c0127edc>] (warn_slowpath_fmt) from [<c034e630>]
(refcount_sub_and_test+0x94/0xa8)
[ 1.333557] [<c034e630>] (refcount_sub_and_test) from [<c01109a8>]
(arm_iommu_release_mapping+0x18/0x2c)
[ 1.343597] [<c01109a8>] (arm_iommu_release_mapping) from
[<c041752c>] (driver_probe_device+0x24c/0x314)
[ 1.353637] [<c041752c>] (driver_probe_device) from [<c04176a0>]
(__driver_attach+0xac/0xb0)
[ 1.362548] [<c04176a0>] (__driver_attach) from [<c0415b94>]
(bus_for_each_dev+0x58/0x7c)
[ 1.371185] [<c0415b94>] (bus_for_each_dev) from [<c0416a14>]
(bus_add_driver+0xe0/0x1f0)
[ 1.379852] [<c0416a14>] (bus_add_driver) from [<c0417f10>]
(driver_register+0x78/0xf4)
[ 1.388305] [<c0417f10>] (driver_register) from [<c010257c>]
(do_one_initcall+0x3c/0x16c)
[ 1.396972] [<c010257c>] (do_one_initcall) from [<c0b00d5c>]
(kernel_init_freeable+0xf8/0x1c4)
[ 1.406066] [<c0b00d5c>] (kernel_init_freeable) from [<c071640c>]
(kernel_init+0x8/0x108)
[ 1.414703] [<c071640c>] (kernel_init) from [<c01010e8>]
(ret_from_fork+0x14/0x2c)
[ 1.422698] Exception stack(0xce049fb0 to 0xce049ff8)
[ 1.428039] 9fa0: 00000000
00000000 00000000 00000000
[ 1.436676] 9fc0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[ 1.445312] 9fe0: 00000000 00000000 00000000 00000000 00000013
00000000
[ 1.452270] ---[ end trace dcb3a72772bbfe7a ]---
[ 1.459045] ti-soc-thermal 48002524.bandgap: This OMAP thermal
sensor is unreliable. You've been warned
[ 1.469055] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp
not accurate
[ 1.476898] ti-soc-thermal 48002524.bandgap: thermal zone device is
NULL
[ 1.485198] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout
60 sec
[ 1.495208] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-08 15:31    [W:0.101 / U:8.612 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site