lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 3/4] rtc: isl1208: add support for isl1219 with tamper detection
Date
Am Mittwoch, den 07.03.2018, 11:47 +0100 schrieb Alexandre Belloni:
> > > > +
> > > > + tv64.tv_sec = rtc_tm_to_time64(&tm);
> > > Why not using an unsigned long long directly here? time64_t is not the
> > > correct type.
> > Do you mean timespec64 is not the correct type here?
> > Then yes, sould be time64_t.
> > If you mean time64_t is not the correct type here,
> > then can you give me some detail why there is no rtc_tm_to_u64,
> > or something like that?
> The rtc subsystem forbids negative times, the proper type should be
> unsigned.
I will add rtc_vaild_tm check.

Which sequence for time conversion would you expect?

time64_t secs = rtc_tm_to_time64(&tm);
BUG_ON(secs < 0);
return sprintf(buf, "%llu\n", (unsigned long long)secs);

or

return sprintf(buf, "%llu\n", (unsigned long long)rtc_tm_to_time64(&tm));
>
> >
> > sprintf(buf, "%lld\n", rtc_tm_to_time64(&tm)) seems correct to me.
> > By the way, is it needed to check for seconds < 0 and return error?
> Indeed, you shoud check the tm with rtc_valid_tm before calling
> rtc_tm_to_time64.
>
> >
> > >
> > > >
> > > > - rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
> > > > + if (id->driver_data == TYPE_ISL1219) {
> > > > + rc = i2c_smbus_write_byte_data(client, ISL1208_REG_09, 0x10);
> > > > + if (rc < 0) {
> > > > + dev_err(&client->dev, "could not enable tamper detection\n");
> > > > + return rc;
> > > > + }
> > > > + isl1208->sysfs_files = &isl1219_rtc_sysfs_files;
> > > > + } else {
> > > > + isl1208->sysfs_files = &isl1208_rtc_sysfs_files;
> > > > + }
> > > > +
> > > I don't think the whole isl1208 is necessary. You should probably use
> > > the .is_visible callback of isl1219_rtc_sysfs_files. This will make the
> > > changelog quite smaller.
> > >
> > Well, I don´t know how to access i2c_device_id from kobject.
> > rtc_attr_is_visible shows how to convert kobject to device and rtc_device,
> > but how to do (id->driver_data == TYPE_ISL1219) here?
> I'd use i2c_set_clientdata/i2c_get_clientdata but I agree that then it
> is basically the same as having isl1208->sysfs_files.
>
> but this makes me realize that the timestamp file doesn't end up at the
> correct location. What you do now is placing it under the i2c device
> while it should be placed under the rtc device (i.e. in
> /sys/class/rtc/rtcX/). This was a mistake made back in 2006.
>
> I guess you'll have to add a new group instead of adding to the current
> one.
I guess I found a way to do it.

static struct attribute *isl1219_rtc_attrs[] = {
&dev_attr_timestamp0.attr,
NULL
};

in probe
if (id->driver_data == TYPE_ISL1219) {
sysfs_merge_group(&rtc->kobj, &isl1219_rtc_sysfs_files);

in remove
struct rtc_device *rtc = i2c_get_clientdata(client);
sysfs_unmerge_group(&rtc->kobj, &isl1219_rtc_sysfs_files);

As far as I got it, I can call unmerge even if group was not merged before.
If it works I don´t need struct isl1208 at all.
>
Diehl AKO Stiftung & Co. KG, Pfannerstraße 75-83, 88239 Wangen im Allgäu
Bereichsvorstand: Dr.-Ing. Michael Siedentop (Sprecher), Josef Fellner (Mitglied)
Sitz der Gesellschaft: Wangen i.A. – Registergericht: Amtsgericht Ulm HRA 620609 – Persönlich haftende Gesellschafterin: Diehl Verwaltungs-Stiftung – Sitz: Nürnberg – Registergericht: Amtsgericht Nürnberg HRA 11756 –
Vorstand: Dr.-Ing. E.h. Thomas Diehl (†) (Vorsitzender), Herr Dipl.-Wirtsch.-Ing. Wolfgang Weggen (stellvertretender Vorsitzender), Dipl.-Kfm. Claus Günther, Dipl.-Kfm. Frank Gutzeit, Dr.-Ing. Heinrich Schunk, Dr.-Ing. Michael Siedentop , Dipl.-Kfm. Dr.-Ing. Martin Sommer, Dipl.-Ing. (FH) Rainer von Borstel, Vorsitzender des Aufsichtsrates: Dr. Klaus Maier
___________________________________________________________________________________________________
Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht. Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.
\
 
 \ /
  Last update: 2018-03-08 13:04    [W:0.046 / U:0.632 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site