lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] media: stm32-dcmi: rework overrun/error case
Date
Do not stop/restart dma on overrun or errors.
Dma will be restarted on current frame transfer
completion. Frame transfer completion is ensured
even if overrun or error occurs by DCMI continuous
capture mode which restarts data transfer at next
frame sync.
Do no warn on overrun while in irq thread, this slows down
system and lead to more overrun errors. Use a counter
instead and log errors at stop streaming.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
version 2:
- typo: remove blank line at the end of stop_streaming()

drivers/media/platform/stm32/stm32-dcmi.c | 29 +++++++++++------------------
1 file changed, 11 insertions(+), 18 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 37d82d3..95ace0f 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -160,6 +160,7 @@ struct stm32_dcmi {
dma_cookie_t dma_cookie;
u32 misr;
int errors_count;
+ int overrun_count;
int buffers_count;
};

@@ -373,23 +374,9 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
}

if ((dcmi->misr & IT_OVR) || (dcmi->misr & IT_ERR)) {
- /*
- * An overflow or an error has been detected,
- * stop current DMA transfert & restart it
- */
- dev_warn(dcmi->dev, "%s: Overflow or error detected\n",
- __func__);
-
dcmi->errors_count++;
- dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n");
-
- spin_unlock_irq(&dcmi->irqlock);
- dmaengine_terminate_all(dcmi->dma_chan);
-
- if (dcmi_start_capture(dcmi))
- dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
- __func__);
- return IRQ_HANDLED;
+ if (dcmi->misr & IT_OVR)
+ dcmi->overrun_count++;
}

spin_unlock_irq(&dcmi->irqlock);
@@ -572,6 +559,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)

dcmi->sequence = 0;
dcmi->errors_count = 0;
+ dcmi->overrun_count = 0;
dcmi->buffers_count = 0;
dcmi->active = NULL;

@@ -682,8 +670,13 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)

clk_disable(dcmi->mclk);

- dev_dbg(dcmi->dev, "Stop streaming, errors=%d buffers=%d\n",
- dcmi->errors_count, dcmi->buffers_count);
+ if (dcmi->errors_count)
+ dev_warn(dcmi->dev, "Some errors found while streaming: errors=%d (overrun=%d), buffers=%d\n",
+ dcmi->errors_count, dcmi->overrun_count,
+ dcmi->buffers_count);
+ dev_dbg(dcmi->dev, "Stop streaming, errors=%d (overrun=%d), buffers=%d\n",
+ dcmi->errors_count, dcmi->overrun_count,
+ dcmi->buffers_count);
}

static const struct vb2_ops dcmi_video_qops = {
--
1.9.1
\
 
 \ /
  Last update: 2018-03-08 11:48    [W:0.047 / U:11.568 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site