lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.4 051/101] iio: st_pressure: st_accel: Initialise sensor platform data properly
Date
From: Shrirang Bagul <shrirang.bagul@canonical.com>

[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ]

This patch fixes the sensor platform data initialisation for st_pressure
and st_accel device drivers. Without this patch, the driver fails to
register the sensors when the user removes and re-loads the driver.

1. Unload the kernel modules for st_pressure
$ sudo rmmod st_pressure_i2c
$ sudo rmmod st_pressure

2. Re-load the driver
$ sudo insmod st_pressure
$ sudo insmod st_pressure_i2c

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/iio/accel/st_accel_core.c | 7 ++++---
drivers/iio/pressure/st_pressure_core.c | 8 ++++----
2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 197a08b4e2f3..84ab20c6b389 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -628,6 +628,8 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
int st_accel_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *adata = iio_priv(indio_dev);
+ struct st_sensors_platform_data *pdata =
+ (struct st_sensors_platform_data *)adata->dev->platform_data;
int irq = adata->get_irq_data_ready(indio_dev);
int err;

@@ -652,9 +654,8 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
&adata->sensor_settings->fs.fs_avl[0];
adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;

- if (!adata->dev->platform_data)
- adata->dev->platform_data =
- (struct st_sensors_platform_data *)&default_accel_pdata;
+ if (!pdata)
+ pdata = (struct st_sensors_platform_data *)&default_accel_pdata;

err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
if (err < 0)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 5056bd68573f..270eeac928bc 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -436,6 +436,8 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
int st_press_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *press_data = iio_priv(indio_dev);
+ struct st_sensors_platform_data *pdata =
+ (struct st_sensors_platform_data *)press_data->dev->platform_data;
int irq = press_data->get_irq_data_ready(indio_dev);
int err;

@@ -464,10 +466,8 @@ int st_press_common_probe(struct iio_dev *indio_dev)
press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;

/* Some devices don't support a data ready pin. */
- if (!press_data->dev->platform_data &&
- press_data->sensor_settings->drdy_irq.addr)
- press_data->dev->platform_data =
- (struct st_sensors_platform_data *)&default_press_pdata;
+ if (!pdata && press_data->sensor_settings->drdy_irq.addr)
+ pdata = (struct st_sensors_platform_data *)&default_press_pdata;

err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
if (err < 0)
--
2.14.1
\
 
 \ /
  Last update: 2018-03-08 06:06    [W:0.350 / U:7.236 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site