lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 05/11] clk: tegra: prepare dfll driver for PWM regulator
From
Date

On 06/02/18 16:34, Peter De Schrijver wrote:
> This patch prepares the dfll driver to work with PWM regulators.
> To do this we introduce a new array lut_uv which gives the voltage for
> a given index generated by the dfll logic. This index will then be
> translated to a PMIC voltage ID in case of I2C using the i2c_lut. In case
> of a PWM regulator, it will be used to determine the PWM duty cycle.
> We also introduce lut_bottom which holds the lowest voltage we will ever
> need. In case of I2C this can be set to zero because the i2c_lut will be
> initialized such that entry 0 will be the lowest voltage we will ever
> need. In case of PWM, the lowest voltage is determined by the regulator
> hardware so we need this software limit. Note that this is different
> from lut_min which gives the lowest voltage we allow taking temperature
> into account. In a future patchset we will update lut_vmin dynamically.
> Similarly lut_max will be the highest voltage allowed taking temperature
> into accouint. Also this will be updated dynamically once temperature
> dependence will be introduced.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> ---
> drivers/clk/tegra/clk-dfll.c | 62 ++++++++++++++++++++++++++------------------
> 1 file changed, 37 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> index 0a7deee..fa97763 100644
> --- a/drivers/clk/tegra/clk-dfll.c
> +++ b/drivers/clk/tegra/clk-dfll.c
> @@ -301,9 +301,10 @@ struct tegra_dfll {
> u32 i2c_slave_addr;
>
> /* i2c_lut array entries are regulator framework selectors */
> - unsigned i2c_lut[MAX_DFLL_VOLTAGES];
> - int i2c_lut_size;
> - u8 lut_min, lut_max, lut_safe;
> + unsigned int i2c_lut[MAX_DFLL_VOLTAGES];
> + unsigned int lut_uv[MAX_DFLL_VOLTAGES];
> + int lut_size;
> + u8 lut_bottom, lut_min, lut_max, lut_safe;
> };
>
> #define clk_hw_to_dfll(_hw) container_of(_hw, struct tegra_dfll, dfll_clk_hw)
> @@ -531,10 +532,10 @@ static void dfll_load_i2c_lut(struct tegra_dfll *td)
> u32 val;
>
> for (i = 0; i < MAX_DFLL_VOLTAGES; i++) {
> - if (i < td->lut_min)
> - lut_index = td->lut_min;
> - else if (i > td->lut_max)
> - lut_index = td->lut_max;
> + if (i < td->lut_bottom)
> + lut_index = td->lut_bottom;
> + else if (i > td->lut_size - 1)
> + lut_index = td->lut_size - 1;
> else
> lut_index = i;
>
> @@ -594,9 +595,9 @@ static void dfll_init_out_if(struct tegra_dfll *td)
> {
> u32 val;
>
> - td->lut_min = 0;
> - td->lut_max = td->i2c_lut_size - 1;
> - td->lut_safe = td->lut_min + 1;
> + td->lut_min = td->lut_bottom;
> + td->lut_max = td->lut_size - 1;
> + td->lut_safe = td->lut_min + (td->lut_min < td->lut_max ? 1 : 0);
>
> dfll_i2c_writel(td, 0, DFLL_OUTPUT_CFG);
> val = (td->lut_safe << DFLL_OUTPUT_CFG_SAFE_SHIFT) |
> @@ -619,11 +620,11 @@ static void dfll_init_out_if(struct tegra_dfll *td)
> */
>
> /**
> - * find_lut_index_for_rate - determine I2C LUT index for given DFLL rate
> + * find_lut_index_for_rate - determine LUT index for given DFLL rate
> * @td: DFLL instance
> * @rate: clock rate
> *
> - * Determines the index of a I2C LUT entry for a voltage that approximately
> + * Determines the index of a LUT entry for a voltage that approximately
> * produces the given DFLL clock rate. This is used when forcing a value
> * to the integrator during rate changes. Returns -ENOENT if a suitable
> * LUT index is not found.
> @@ -637,11 +638,11 @@ static int find_lut_index_for_rate(struct tegra_dfll *td, unsigned long rate)
> if (IS_ERR(opp))
> return PTR_ERR(opp);
>
> - uv = dev_pm_opp_get_voltage(opp);
> + uv = dev_pm_opp_get_voltage(opp) / td->soc->alignment.step_uv;
> dev_pm_opp_put(opp);
>
> - for (i = 0; i < td->i2c_lut_size; i++) {
> - if (regulator_list_voltage(td->vdd_reg, td->i2c_lut[i]) == uv)
> + for (i = td->lut_bottom; i < td->lut_size; i++) {
> + if ((td->lut_uv[i] / td->soc->alignment.step_uv) >= uv)
> return i;
> }
>
> @@ -1377,15 +1378,17 @@ static int dfll_init(struct tegra_dfll *td)
> */
> static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
> {
> - int i, n_voltages, reg_uV;
> + int i, n_voltages, reg_mult, align_mult;
>
> + align_mult = uV / td->soc->alignment.step_uv;
> n_voltages = regulator_count_voltages(td->vdd_reg);
> for (i = 0; i < n_voltages; i++) {
> - reg_uV = regulator_list_voltage(td->vdd_reg, i);
> - if (reg_uV < 0)
> + reg_mult = regulator_list_voltage(td->vdd_reg, i) /
> + td->soc->alignment.step_uv;
> + if (reg_mult < 0)
> break;
>
> - if (uV == reg_uV)
> + if (align_mult == reg_mult)
> return i;
> }
>
> @@ -1399,15 +1402,17 @@ static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
> * */
> static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
> {
> - int i, n_voltages, reg_uV;
> + int i, n_voltages, reg_mult, align_mult;
>
> + align_mult = uV / td->soc->alignment.step_uv;
> n_voltages = regulator_count_voltages(td->vdd_reg);
> for (i = 0; i < n_voltages; i++) {
> - reg_uV = regulator_list_voltage(td->vdd_reg, i);
> - if (reg_uV < 0)
> + reg_mult = regulator_list_voltage(td->vdd_reg, i) /
> + td->soc->alignment.step_uv;
> + if (reg_mult < 0)
> break;
>
> - if (uV <= reg_uV)
> + if (align_mult <= reg_mult)
> return i;
> }
>
> @@ -1450,8 +1455,10 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
> if (lut < 0)
> goto out;
> td->i2c_lut[0] = lut;
> + td->lut_bottom = 0;
>
> for (j = 1, rate = 0; ; rate++) {
> +
> opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
> if (IS_ERR(opp))
> break;
> @@ -1484,13 +1491,18 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
> if (v >= v_max)
> break;
> }
> - td->i2c_lut_size = j;
> + td->lut_size = j;
>
> if (!td->dvco_rate_min)
> dev_err(td->dev, "no opp above DFLL minimum voltage %d mV\n",
> td->soc->cvb->min_millivolts);
> - else
> + else {
> ret = 0;
> + for (j = 0; j < td->lut_size; j++)
> + td->lut_uv[j] =
> + regulator_list_voltage(td->vdd_reg,
> + td->i2c_lut[j]);
> + }
>
> out:
> return ret;
>

I am a bit confused by this patch as I don't fully understand from the
description what is being changed. For example, there are a few places
where you are dividing by td->soc->alignment.step_uv, which seems to be
changing the calculations/behaviour for I2C unless I am missing something?

I would also consider renaming lut_bottom and lut_min as something like
lut_abs_min and lut_cur_min, to indicate that one is the absolute min
and the other is the current min depending on operating conditions.

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2018-03-08 23:51    [W:0.532 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site