lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: phy: Tell caller result of phy_change()
Date
In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification)
the phy_interrupt system was changed to use a traditional threaded
interrupt scheme instead of a workqueue approach.

With this change, the phy status check moved into phy_change, which
did not report back to the caller whether or not the interrupt was
handled. This means that, in the case of a shared phy interrupt,
only the first phydev's interrupt registers are checked (since
phy_interrupt() would always return IRQ_HANDLED). This leads to
interrupt storms when it is a secondary device that's actually the
interrupt source.

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
---
drivers/net/phy/phy.c | 13 +++++++------
include/linux/phy.h | 1 -
2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e3e29c2b028b..ebce9f2b2742 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -617,6 +617,8 @@ static void phy_error(struct phy_device *phydev)
phy_trigger_machine(phydev, false);
}

+static irqreturn_t phy_change(struct phy_device *phydev);
+
/**
* phy_interrupt - PHY interrupt handler
* @irq: interrupt line
@@ -632,9 +634,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
if (PHY_HALTED == phydev->state)
return IRQ_NONE; /* It can't be ours. */

- phy_change(phydev);
-
- return IRQ_HANDLED;
+ return phy_change(phydev);
}

/**
@@ -723,12 +723,12 @@ EXPORT_SYMBOL(phy_stop_interrupts);
* phy_change - Called by the phy_interrupt to handle PHY changes
* @phydev: phy_device struct that interrupted
*/
-void phy_change(struct phy_device *phydev)
+static irqreturn_t phy_change(struct phy_device *phydev)
{
if (phy_interrupt_is_valid(phydev)) {
if (phydev->drv->did_interrupt &&
!phydev->drv->did_interrupt(phydev))
- return;
+ return IRQ_NONE;

if (phydev->state == PHY_HALTED)
if (phy_disable_interrupts(phydev))
@@ -745,10 +745,11 @@ void phy_change(struct phy_device *phydev)

if (phy_interrupt_is_valid(phydev) && phy_clear_interrupt(phydev))
goto phy_err;
- return;
+ return IRQ_HANDLED;

phy_err:
phy_error(phydev);
+ return IRQ_NONE;
}

/**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5a0c3e53e7c2..2e55838655b9 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1011,7 +1011,6 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner);
int phy_drivers_register(struct phy_driver *new_driver, int n,
struct module *owner);
void phy_state_machine(struct work_struct *work);
-void phy_change(struct phy_device *phydev);
void phy_change_work(struct work_struct *work);
void phy_mac_interrupt(struct phy_device *phydev);
void phy_start_machine(struct phy_device *phydev);
--
2.16.2
\
 
 \ /
  Last update: 2018-03-08 21:32    [W:0.079 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site