lkml.org 
[lkml]   [2018]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/8] arm64: zynqmp: Add support for Xilinx zcu104-revA
On Fri, Mar 02, 2018 at 08:04:30PM +0100, Michal Simek wrote:
> Xilinx zcu104 is another customer board. It is sort of zcu102 clone
> with some differences.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> Changes in v3:
> - Use i2c-mux instead of i2cswitch - was done with zcu106
> - Remove gpio and usb aliases
>
> Changes in v2:
> - Remove i2c mw u-boot commands
> - Record compatible string to xilinx.txt
>
> Documentation/devicetree/bindings/arm/xilinx.txt | 3 +
> arch/arm64/boot/dts/xilinx/Makefile | 1 +
> arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 195 ++++++++++++++++++++++
> 3 files changed, 199 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2018-03-07 21:32    [W:0.093 / U:6.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site