lkml.org 
[lkml]   [2018]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/2] dt-bindings: usb: ehci: add optional external vbus supply property
On Thu, Mar 01, 2018 at 10:51:38AM +0100, Amelie Delaunay wrote:
> On some boards, especially when vbus supply requires large current,
> and the charge pump on the PHY isn't enough, an external vbus power switch
> per port may be used.
> Add portN_vbus-supply property to usb-ehci bindings. As the number of ports
> depends on the ehci controller, and the port on which an external vbus
> supply depends on the platform, <portN> is used to make it generic.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
> Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> index 3efde12..cd576db 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> @@ -19,6 +19,7 @@ Optional properties:
> - phys : phandle + phy specifier pair
> - phy-names : "usb"
> - resets : phandle + reset specifier pair
> + - portN_vbus-supply : phandle of regulator supplying vbus for port N

Just make this an array with the index being the port (and drop
"portN_").

Rob

\
 
 \ /
  Last update: 2018-03-06 02:58    [W:0.046 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site