lkml.org 
[lkml]   [2018]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/2] serial: stm32: update interrupt initialization
On Wed, Feb 28, 2018 at 10:51:17AM +0000, Bich HEMON wrote:
> For each port, get each IRQ using its specific name instead of its index.
>
> Signed-off-by: Bich Hemon <bich.hemon@st.com>
> ---
> drivers/tty/serial/stm32-usart.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
> index 0fa735b..5c85cbc 100644
> --- a/drivers/tty/serial/stm32-usart.c
> +++ b/drivers/tty/serial/stm32-usart.c
> @@ -680,8 +680,8 @@ static int stm32_init_port(struct stm32_port *stm32port,
> port->flags = UPF_BOOT_AUTOCONF;
> port->ops = &stm32_uart_ops;
> port->dev = &pdev->dev;
> - port->irq = platform_get_irq(pdev, 0);
> - stm32port->wakeirq = platform_get_irq(pdev, 1);
> + port->irq = platform_get_irq_byname(pdev, "event");
> + stm32port->wakeirq = platform_get_irq_byname(pdev, "wakeup");

This change is not necessary. The interrupts should be at fixed indices.

> stm32port->fifoen = stm32port->info->cfg.has_fifo;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> --
> 1.9.1

\
 
 \ /
  Last update: 2018-03-06 01:52    [W:0.103 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site