lkml.org 
[lkml]   [2018]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2/2] net: mvneta: improve suspend/resume
Current suspend/resume implementation reuses the mvneta_open() and
mvneta_close(), but it could be optimized to take only necessary
actions during suspend/resume.

One obvious problem of current implementation is: after hundreds of
system suspend/resume cycles, the resume of mvneta could fail due to
fragmented dma coherent memory. After this patch, the non-necessary
memory alloc/free is optimized out.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
drivers/net/ethernet/marvell/mvneta.c | 76 ++++++++++++++++++++++++++++++-----
1 file changed, 66 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 4ec69bbd1eb4..1870f1dd7093 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4575,14 +4575,46 @@ static int mvneta_remove(struct platform_device *pdev)
#ifdef CONFIG_PM_SLEEP
static int mvneta_suspend(struct device *device)
{
+ int queue;
struct net_device *dev = dev_get_drvdata(device);
struct mvneta_port *pp = netdev_priv(dev);

- rtnl_lock();
- if (netif_running(dev))
- mvneta_stop(dev);
- rtnl_unlock();
+ if (!netif_running(dev))
+ return 0;
+
netif_device_detach(dev);
+
+ mvneta_stop_dev(pp);
+
+ if (!pp->neta_armada3700) {
+ spin_lock(&pp->lock);
+ pp->is_stopped = true;
+ spin_unlock(&pp->lock);
+
+ cpuhp_state_remove_instance_nocalls(online_hpstate,
+ &pp->node_online);
+ cpuhp_state_remove_instance_nocalls(CPUHP_NET_MVNETA_DEAD,
+ &pp->node_dead);
+ }
+
+ for (queue = 0; queue < rxq_number; queue++) {
+ struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+
+ mvneta_rxq_drop_pkts(pp, rxq);
+ }
+
+ for (queue = 0; queue < txq_number; queue++) {
+ struct mvneta_tx_queue *txq = &pp->txqs[queue];
+
+ /* Set minimum bandwidth for disabled TXQs */
+ mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
+ mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
+
+ /* Set Tx descriptors queue starting address and size */
+ mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
+ mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
+ }
+
clk_disable_unprepare(pp->clk_bus);
clk_disable_unprepare(pp->clk);
return 0;
@@ -4593,7 +4625,7 @@ static int mvneta_resume(struct device *device)
struct platform_device *pdev = to_platform_device(device);
struct net_device *dev = dev_get_drvdata(device);
struct mvneta_port *pp = netdev_priv(dev);
- int err;
+ int err, queue;

clk_prepare_enable(pp->clk);
if (!IS_ERR(pp->clk_bus))
@@ -4614,13 +4646,37 @@ static int mvneta_resume(struct device *device)
return err;
}

+ if (!netif_running(dev))
+ return 0;
+
netif_device_attach(dev);
- rtnl_lock();
- if (netif_running(dev)) {
- mvneta_open(dev);
- mvneta_set_rx_mode(dev);
+
+ for (queue = 0; queue < rxq_number; queue++) {
+ struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+
+ rxq->next_desc_to_proc = 0;
+ mvneta_rxq_hw_init(pp, rxq);
}
- rtnl_unlock();
+
+ for (queue = 0; queue < txq_number; queue++) {
+ struct mvneta_tx_queue *txq = &pp->txqs[queue];
+
+ txq->next_desc_to_proc = 0;
+ mvneta_txq_hw_init(pp, txq);
+ }
+
+ if (!pp->neta_armada3700) {
+ spin_lock(&pp->lock);
+ pp->is_stopped = false;
+ spin_unlock(&pp->lock);
+ cpuhp_state_add_instance_nocalls(online_hpstate,
+ &pp->node_online);
+ cpuhp_state_add_instance_nocalls(CPUHP_NET_MVNETA_DEAD,
+ &pp->node_dead);
+ }
+
+ mvneta_set_rx_mode(dev);
+ mvneta_start_dev(pp);

return 0;
}
--
2.16.3
\
 
 \ /
  Last update: 2018-03-29 12:16    [W:0.079 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site