lkml.org 
[lkml]   [2018]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] scsi: Introduce sdev_printk_ratelimited to throttle frequent printk
Date
There would be so many same lines printed by frequent prink if one 
disk went wrong, like,
[ 546.185242] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185258] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185280] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185307] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185334] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185364] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185390] sd 0:1:0:0: rejecting I/O to offline device
[ 546.185410] sd 0:1:0:0: rejecting I/O to offline device
For slow serial console, the frequent prink may block the printk, and
if spin_lock was acquired before the printk like in scsi_request_fn,
that could trigger the watchdog.

Relative disscussion can be found here,
https://bugzilla.kernel.org/show_bug.cgi?id=199003
And Petr brought the idea to throttle the frequent printk here, it's
useless to print the same lines frequently after all.

Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
CC: BartVanAssche <Bart.VanAssche@wdc.com>
CC: Petr Mladek <pmladek@suse.com>
CC: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
CC: Tejun Heo <tj@kernel.org>
---
drivers/scsi/scsi_lib.c | 6 +++---
include/scsi/scsi_device.h | 10 ++++++++++
2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index c84f931..f77e801 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1301,7 +1301,7 @@ static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req)
* commands. The device must be brought online
* before trying any recovery commands.
*/
- sdev_printk(KERN_ERR, sdev,
+ sdev_printk_ratelimited(KERN_ERR, sdev,
"rejecting I/O to offline device\n");
ret = BLKPREP_KILL;
break;
@@ -1310,7 +1310,7 @@ static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req)
* If the device is fully deleted, we refuse to
* process any commands as well.
*/
- sdev_printk(KERN_ERR, sdev,
+ sdev_printk_ratelimited(KERN_ERR, sdev,
"rejecting I/O to dead device\n");
ret = BLKPREP_KILL;
break;
@@ -1802,7 +1802,7 @@ static void scsi_request_fn(struct request_queue *q)
break;

if (unlikely(!scsi_device_online(sdev))) {
- sdev_printk(KERN_ERR, sdev,
+ sdev_printk_ratelimited(KERN_ERR, sdev,
"rejecting I/O to offline device\n");
scsi_kill_request(req, q);
continue;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 7ae177c..378d3f2 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -249,6 +249,16 @@ struct scsi_device {
#define sdev_printk(l, sdev, fmt, a...) \
sdev_prefix_printk(l, sdev, NULL, fmt, ##a)

+#define sdev_printk_ratelimited(l, sdev, fmt, a...) \
+({ \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ \
+ if (__ratelimit(&_rs)) \
+ sdev_prefix_printk(l, sdev, NULL, fmt, ##a); \
+})
+
__printf(3, 4) void
scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);

--
1.8.3.1
\
 
 \ /
  Last update: 2018-03-28 10:45    [W:0.054 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site