lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] usb: dwc3: gadget: Correct handling of scattergather lists
Date
From: Anurag Kumar Vulisha <anuragku@xilinx.com>

The code logic in dwc3_prepare_one_trb() incorrectly uses the address
and length fields present in req packet for mapping TRB's instead of
using the address and length fields of scattergather lists. This patch
correct's the code to use sg->address and sg->length when scattergather
lists are present.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
---
Changes in v2:
1. Split the single patch into 2 patches as suggested by Felipe Balbi
2. Renamed sg_to_start variable to start_sg
---
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/gadget.c | 25 ++++++++++++++++++++++---
2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 860d2bc..1406c4f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -718,6 +718,7 @@ struct dwc3_hwparams {
* @list: a list_head used for request queueing
* @dep: struct dwc3_ep owning this request
* @sg: pointer to first incomplete sg
+ * @start_sg: pointer to the sg which should be queued next
* @num_pending_sgs: counter to pending sgs
* @remaining: amount of data remaining
* @epnum: endpoint number to which this request refers
@@ -734,6 +735,7 @@ struct dwc3_request {
struct list_head list;
struct dwc3_ep *dep;
struct scatterlist *sg;
+ struct scatterlist *start_sg;

unsigned num_pending_sgs;
unsigned remaining;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2bda4eb..330a4de 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -978,11 +978,19 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
struct dwc3_request *req, unsigned chain, unsigned node)
{
struct dwc3_trb *trb;
- unsigned length = req->request.length;
+ unsigned int length;
+ dma_addr_t dma;
unsigned stream_id = req->request.stream_id;
unsigned short_not_ok = req->request.short_not_ok;
unsigned no_interrupt = req->request.no_interrupt;
- dma_addr_t dma = req->request.dma;
+
+ if (req->request.num_sgs > 0) {
+ length = sg_dma_len(req->start_sg);
+ dma = sg_dma_address(req->start_sg);
+ } else {
+ length = req->request.length;
+ dma = req->request.dma;
+ }

trb = &dep->trb_pool[dep->trb_enqueue];

@@ -1048,7 +1056,7 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
struct dwc3_request *req)
{
- struct scatterlist *sg = req->sg;
+ struct scatterlist *sg = req->start_sg;
struct scatterlist *s;
int i;

@@ -1081,6 +1089,16 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
dwc3_prepare_one_trb(dep, req, chain, i);
}

+ /*
+ * There can be a situation where all sgs in sglist are not
+ * queued because of insufficient trb number. To handle this
+ * case, update start_sg to next sg to be queued, so that
+ * we have free trbs we can continue queuing from where we
+ * previously stopped
+ */
+ if (chain)
+ req->start_sg = sg_next(s);
+
if (!dwc3_calc_trbs_left(dep))
break;
}
@@ -1171,6 +1189,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
return;

req->sg = req->request.sg;
+ req->start_sg = req->sg;
req->num_pending_sgs = req->request.num_mapped_sgs;

if (req->num_pending_sgs > 0)
--
2.1.1
\
 
 \ /
  Last update: 2018-03-27 13:06    [W:0.039 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site