lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] aspeed: watchdog: Set bootstatus during probe
Date
Check the aspeed timeout status register to see if the system has booted
from the secondary boot source. If so, set the watchdog device
bootstatus flag for "Card previously reset the CPU."

Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
---
Changes since v1:
- use bootstatus instead of status
- use WDIOF_CARDRESET instead of raw register contents

drivers/watchdog/aspeed_wdt.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index a5b8eb2..1abe4d0 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -55,6 +55,8 @@ struct aspeed_wdt_config {
#define WDT_CTRL_WDT_INTR BIT(2)
#define WDT_CTRL_RESET_SYSTEM BIT(1)
#define WDT_CTRL_ENABLE BIT(0)
+#define WDT_TIMEOUT_STATUS 0x10
+#define WDT_TIMEOUT_STATUS_BOOT_SECONDARY BIT(1)

/*
* WDT_RESET_WIDTH controls the characteristics of the external pulse (if
@@ -192,6 +194,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
struct device_node *np;
const char *reset_type;
u32 duration;
+ u32 status;
int ret;

wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
@@ -307,6 +310,10 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
writel(duration - 1, wdt->base + WDT_RESET_WIDTH);
}

+ status = readl(wdt->base + WDT_TIMEOUT_STATUS);
+ if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY)
+ wdt->wdd.bootstatus = WDIOF_CARDRESET;
+
ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
if (ret) {
dev_err(&pdev->dev, "failed to register\n");
--
1.8.3.1
\
 
 \ /
  Last update: 2018-03-27 22:09    [W:0.035 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site