lkml.org 
[lkml]   [2018]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 5/8] remoteproc: da8xx: add the missing retval check for clk_enable()
From
Date
On 03/23/2018 08:04 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> The davinci platform is being switched to using the common clock
> framework, where clk_enable() can fail. Add the return value check.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This patch can be applied agnostic of the CCF change as well.
I had been using "remoteproc/davinci: ..." on the patch subject for all
davinci remoteproc patches. So prefer to maintain the same.

With that,
Acked-by: Suman Anna <s-anna@ti.com>

regards
Suman

> ---
> drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
> index bf3b9034c319..2b24291337b7 100644
> --- a/drivers/remoteproc/da8xx_remoteproc.c
> +++ b/drivers/remoteproc/da8xx_remoteproc.c
> @@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
> struct device *dev = rproc->dev.parent;
> struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
> struct clk *dsp_clk = drproc->dsp_clk;
> + int ret;
>
> /* hw requires the start (boot) address be on 1KB boundary */
> if (rproc->bootaddr & 0x3ff) {
> @@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
>
> writel(rproc->bootaddr, drproc->bootreg);
>
> - clk_enable(dsp_clk);
> + ret = clk_enable(dsp_clk);
> + if (ret) {
> + dev_err(dev, "clk_enable() failed: %d\n", ret);
> + return ret;
> + }
> +
> davinci_clk_reset_deassert(dsp_clk);
>
> return 0;
>

\
 
 \ /
  Last update: 2018-03-26 23:17    [W:0.145 / U:4.076 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site