lkml.org 
[lkml]   [2018]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron.
Date
For veyron the binding should provide both PWM timings, the delay between
you enable the PWM and set the enable signal, and the delay between you
disable the PWM signal and clear the enable signal. Update the binding
accordingly, in this case the panels connected to the veyron boards have
a symmetric power sequence, hence the same value is used.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v5:
- None.
Changes since v4:
- Rebased on top of mainline.
Changes since v3:
- Use new -ms names for proprieties.
Changes since v2:
- Use new names for proprieties.
Changes since v1:
- Add this new patch to fix current binding on veyron.
---
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index d752a315f884..5a8c7f3abb38 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -96,7 +96,8 @@
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 0>;
- pwm-delay-us = <10000>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
};

gpio-charger {
--
2.16.2
\
 
 \ /
  Last update: 2018-03-26 11:53    [W:0.092 / U:3.624 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site