lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 56/77] scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>


[ Upstream commit 9de416ac67b54d666327ba927a190f4b7259f4a0 ]

When enabled for both SCSI and NVME support, and connected pt2pt to a
SCSI only target, the driver nodelist entry for the remote port is left
in PRLI_ISSUE state and no SCSI LUNs are discovered. Works fine if only
configured for SCSI support.

Error was due to some of the prli points still reflecting the need to
send only 1 PRLI. On a lot of fabric configs, targets were NVME only,
which meant the fabric-reported protocol attributes were only telling
the driver one protocol or the other. Thus things worked fine. With
pt2pt, the driver must send a PRLI for both protocols as there are no
hints on what the target supports. Thus pt2pt targets were hitting the
multiple PRLI issues.

Complete the dual PRLI support. Track explicitly whether scsi (fcp) or
nvme prli's have been sent. Accurately track protocol support detected
on each node as reported by the fabric or probed by PRLI traffic.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/lpfc/lpfc_ct.c | 1 +
drivers/scsi/lpfc/lpfc_els.c | 30 ++++++++++++++++++++----------
drivers/scsi/lpfc/lpfc_nportdisc.c | 30 +++++++++++++-----------------
3 files changed, 34 insertions(+), 27 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -471,6 +471,7 @@ lpfc_prep_node_fc4type(struct lpfc_vport
"Parse GID_FTrsp: did:x%x flg:x%x x%x",
Did, ndlp->nlp_flag, vport->fc_flag);

+ ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
/* By default, the driver expects to support FCP FC4 */
if (fc4_type == FC_TYPE_FCP)
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2088,6 +2088,10 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba
ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
+
+ /* Driver supports multiple FC4 types. Counters matter. */
+ vport->fc_prli_sent--;
+ ndlp->fc4_prli_sent--;
spin_unlock_irq(shost->host_lock);

lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
@@ -2095,9 +2099,6 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba
irsp->ulpStatus, irsp->un.ulpWord[4],
ndlp->nlp_DID);

- /* Ddriver supports multiple FC4 types. Counters matter. */
- vport->fc_prli_sent--;
-
/* PRLI completes to NPort <nlp_DID> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0103 PRLI completes to NPort x%06x "
@@ -2111,7 +2112,6 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba

if (irsp->ulpStatus) {
/* Check for retry */
- ndlp->fc4_prli_sent--;
if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
/* ELS command is being retried */
goto out;
@@ -2190,6 +2190,15 @@ lpfc_issue_els_prli(struct lpfc_vport *v
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
local_nlp_type = ndlp->nlp_fc4_type;

+ /* This routine will issue 1 or 2 PRLIs, so zero all the ndlp
+ * fields here before any of them can complete.
+ */
+ ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
+ ndlp->nlp_type &= ~(NLP_NVME_TARGET | NLP_NVME_INITIATOR);
+ ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+ ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+ ndlp->nvme_fb_size = 0;
+
send_next_prli:
if (local_nlp_type & NLP_FC4_FCP) {
/* Payload is 4 + 16 = 20 x14 bytes. */
@@ -2298,6 +2307,13 @@ lpfc_issue_els_prli(struct lpfc_vport *v
elsiocb->iocb_cmpl = lpfc_cmpl_els_prli;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_PRLI_SND;
+
+ /* The vport counters are used for lpfc_scan_finished, but
+ * the ndlp is used to track outstanding PRLIs for different
+ * FC4 types.
+ */
+ vport->fc_prli_sent++;
+ ndlp->fc4_prli_sent++;
spin_unlock_irq(shost->host_lock);
if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
IOCB_ERROR) {
@@ -2308,12 +2324,6 @@ lpfc_issue_els_prli(struct lpfc_vport *v
return 1;
}

- /* The vport counters are used for lpfc_scan_finished, but
- * the ndlp is used to track outstanding PRLIs for different
- * FC4 types.
- */
- vport->fc_prli_sent++;
- ndlp->fc4_prli_sent++;

/* The driver supports 2 FC4 types. Make sure
* a PRLI is issued for all types before exiting.
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -390,6 +390,11 @@ lpfc_rcv_plogi(struct lpfc_vport *vport,
break;
}

+ ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
+ ndlp->nlp_type &= ~(NLP_NVME_TARGET | NLP_NVME_INITIATOR);
+ ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+ ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+
/* Check for Nport to NPort pt2pt protocol */
if ((vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_PT2PT_PLOGI)) {
@@ -742,9 +747,6 @@ lpfc_rcv_prli(struct lpfc_vport *vport,
lp = (uint32_t *) pcmd->virt;
npr = (PRLI *) ((uint8_t *) lp + sizeof (uint32_t));

- ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
- ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
- ndlp->nlp_flag &= ~NLP_FIRSTBURST;
if ((npr->prliType == PRLI_FCP_TYPE) ||
(npr->prliType == PRLI_NVME_TYPE)) {
if (npr->initiatorFunc) {
@@ -769,8 +771,12 @@ lpfc_rcv_prli(struct lpfc_vport *vport,
* type. Target mode does not issue gft_id so doesn't get
* the fc4 type set until now.
*/
- if ((phba->nvmet_support) && (npr->prliType == PRLI_NVME_TYPE))
+ if (phba->nvmet_support && (npr->prliType == PRLI_NVME_TYPE)) {
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+ }
+ if (npr->prliType == PRLI_FCP_TYPE)
+ ndlp->nlp_fc4_type |= NLP_FC4_FCP;
}
if (rport) {
/* We need to update the rport role values */
@@ -1552,7 +1558,6 @@ lpfc_rcv_prli_reglogin_issue(struct lpfc
if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
lpfc_rcv_prli(vport, ndlp, cmdiocb);
lpfc_els_rsp_prli_acc(vport, cmdiocb, ndlp);
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
} else {
/* RPI registration has not completed. Reject the PRLI
* to prevent an illegal state transition when the
@@ -1568,6 +1573,7 @@ lpfc_rcv_prli_reglogin_issue(struct lpfc
stat.un.b.lsRjtRsnCodeExp = LSEXP_CMD_IN_PROGRESS;
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
ndlp, NULL);
+ return ndlp->nlp_state;
}
} else {
/* Initiator mode. */
@@ -1922,13 +1928,6 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vp
return ndlp->nlp_state;
}

- /* Check out PRLI rsp */
- ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
- ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
-
- /* NVME or FCP first burst must be negotiated for each PRLI. */
- ndlp->nlp_flag &= ~NLP_FIRSTBURST;
- ndlp->nvme_fb_size = 0;
if (npr && (npr->acceptRspCode == PRLI_REQ_EXECUTED) &&
(npr->prliType == PRLI_FCP_TYPE)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
@@ -1945,8 +1944,6 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vp
if (npr->Retry)
ndlp->nlp_fcp_info |= NLP_FCP_2_DEVICE;

- /* PRLI completed. Decrement count. */
- ndlp->fc4_prli_sent--;
} else if (nvpr &&
(bf_get_be32(prli_acc_rsp_code, nvpr) ==
PRLI_REQ_EXECUTED) &&
@@ -1991,8 +1988,6 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vp
be32_to_cpu(nvpr->word5),
ndlp->nlp_flag, ndlp->nlp_fcp_info,
ndlp->nlp_type);
- /* PRLI completed. Decrement count. */
- ndlp->fc4_prli_sent--;
}
if (!(ndlp->nlp_type & NLP_FCP_TARGET) &&
(vport->port_type == LPFC_NPIV_PORT) &&
@@ -2016,7 +2011,8 @@ out_err:
ndlp->nlp_prev_state = NLP_STE_PRLI_ISSUE;
if (ndlp->nlp_type & (NLP_FCP_TARGET | NLP_NVME_TARGET))
lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
- else
+ else if (ndlp->nlp_type &
+ (NLP_FCP_INITIATOR | NLP_NVME_INITIATOR))
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
} else
lpfc_printf_vlog(vport,

\
 
 \ /
  Last update: 2018-03-23 12:50    [W:0.178 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site