lkml.org 
[lkml]   [2018]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] block, bfq: keep peak_rate estimation within range 1..2^32-1
From
Date


> Il giorno 20 mar 2018, alle ore 15:41, Konstantin Khlebnikov <khlebnikov@yandex-team.ru> ha scritto:
>
> On 20.03.2018 06:00, Paolo Valente wrote:
>>> Il giorno 19 mar 2018, alle ore 14:28, Konstantin Khlebnikov <khlebnikov@yandex-team.ru> ha scritto:
>>>
>>> On 19.03.2018 09:03, Paolo Valente wrote:
>>>>> Il giorno 05 mar 2018, alle ore 04:48, Konstantin Khlebnikov <khlebnikov@yandex-team.ru> ha scritto:
>>>>>
>>>>> Rate should never overflow or become zero because it is used as divider.
>>>>> This patch accumulates it with saturation.
>>>>>
>>>>> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
>>>>> ---
>>>>> block/bfq-iosched.c | 8 +++++---
>>>>> 1 file changed, 5 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
>>>>> index aeca22d91101..a236c8d541b5 100644
>>>>> --- a/block/bfq-iosched.c
>>>>> +++ b/block/bfq-iosched.c
>>>>> @@ -2546,7 +2546,8 @@ static void bfq_reset_rate_computation(struct bfq_data *bfqd,
>>>>>
>>>>> static void bfq_update_rate_reset(struct bfq_data *bfqd, struct request *rq)
>>>>> {
>>>>> - u32 rate, weight, divisor;
>>>>> + u32 weight, divisor;
>>>>> + u64 rate;
>>>>>
>>>>> /*
>>>>> * For the convergence property to hold (see comments on
>>>>> @@ -2634,9 +2635,10 @@ static void bfq_update_rate_reset(struct bfq_data *bfqd, struct request *rq)
>>>>> */
>>>>> bfqd->peak_rate *= divisor-1;
>>>>> bfqd->peak_rate /= divisor;
>>>>> - rate /= divisor; /* smoothing constant alpha = 1/divisor */
>>>>> + do_div(rate, divisor); /* smoothing constant alpha = 1/divisor */
>>>>>
>>>>> - bfqd->peak_rate += rate;
>>>>> + /* rate should never overlow or become zero */
>>>> It is bfqd->peak_rate that is used as a divider, and bfqd->peak_rate doesn't risk to be zero even if the variable 'rate' is zero here.
>>>> So I guess the reason why you consider the possibility that bfqd->peak_rate becomes zero is because of an overflow when summing 'rate'. But, according to my calculations, this should be impossible with devices with sensible speeds.
>>>> These are the reasons why I decided I could make it with a 32-bit variable, without any additional clamping. Did I make any mistake in my evaluation?
>>>
>>> According to Murphy's law this is inevitable..
>>>
>> Yep. Actually Murphy has been even clement this time, by making the
>> failure occur to a kernel expert :)
>>> I've seen couple division by zero crashes in bfq_wr_duration.
>>> Unfortunately logs weren't recorded.
>>>
>>>> Anyway, even if I made some mistake about the maximum possible value of the device rate, and the latter may be too high for bfqd->peak_rate to contain it, then I guess the right solution would not be to clamp the actual rate to U32_MAX, but to move bfqd->peak_rate to 64 bits. Or am I missing something else?
>>>>>> + bfqd->peak_rate = clamp_t(u64, rate + bfqd->peak_rate, 1, U32_MAX);
>>>
>>> 32-bit should be enough and better for division.
>>> My patch makes sure it never overflows/underflows.
>>> That's cheaper than full 64-bit/64-bit division.
>>> Anyway 64-bit speed could overflow too. =)
>>>
>> I see your point. Still, if the mistake is not in sizing, then you
>> bumped into some odd bug. In this respect, I don't like much the idea
>> of sweeping the dust under the carpet. So, let me ask you for a
>> little bit more help. With your patch applied, and thus with no risk
>> of crashes, what about adding, right before your clamp_t, something
>> like:
>> if (!bfqd->peak_rate)
>> pr_crit(<dump of all the variables involved in updating bfqd->peak_rate>);
>> Once the failure shows up (Murphy permitting), we might have hints to
>> the bug causing it.
>> Apart from that, I have no problem with patches that make bfq more
>> robust, even in a sort of black-box way.
>
> This rate estimator is already works as a black-box with smoothing and
> low-pass filter inside.

Actually, it is just what you say: a low-pass filter, which works by
deflating two non-null quantities (the previous and the current rate
rate), by and adding these quantities to each other (to get the new
estimated rate). In addition to being larger than 0, both quantities
are much lower than U32_MAX, so this computation should never yield
zero because of an overflow.

Even some occasional zeros read for the sampled rate (because of the
suspicion you express below), cannot lead to a null estimated rate.
In fact, this is a low-pass filter, meant to cut off occasional
spurious values.

I'm insisting on this part, just because, maybe, you say that it "acts
as a black-box" because there is something more, which I'm overlooking
here, and maybe the bug is exactly in the part I'm overlooking. But,
if this is not the case, I'll just stop now for this point.

> It has limitations thus this is ok to declare
> range of expected\sane results.
>

Correct, but if the odd value you cut off is a random value that
follows from a bug (and I see no other possibility, in view of the
above arguments), then the result may still be completely wrong. For
example:
- the device may have a rate of, say, 200 MB/s
- the computation of the new estimated rate yields 0
- you limit this result to ~0 MB/s but >0 MB/s; this avoids division
errors, but still leaves you with a completely wrong rate, and a
consequently inconsistent behavior of the scheduler

> It would be nice to show estimated rate in sysfs to let user
> diagnose whenever it is wrong for a long period of time.

Absolutely. This is actually already shown indirectly, through the
budget_max parameter, which is the number of sectors served at peak
rate during slice_sync.

> Printing message all the time even ratelimited is a wrong idea.
> If this should never happens - WARN_ONCE is more than enough.
>

I'm sorry, I was totally unclear here. My proposal for you is:
since this failure does occur in your system, please add, temporarily, the
printing of all involved values *all the times*, so that you can track down
the bug, and fix the actual problem leading to this division by zero.

What do you think?

> I suspect crashes might be caused by bumpy timer which was affected by smi/nmi from mce.

Yep. The problem is that, for the estimated rate to go to zero, a
null value must be sampled for several consecutive times.

> I'll try to find evidence.

Getting to the bottom of this would be really great.

Looking forward to your findings,
Paolo

>
>> Thanks a lot,
>> Paolo
>>>
>>>>> update_thr_responsiveness_params(bfqd);
>>>>>
>>>>> reset_computation:

\
 
 \ /
  Last update: 2018-03-21 00:50    [W:0.071 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site