lkml.org 
[lkml]   [2018]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 13/19] arm: dts: mt7623: move node mt6323 leds to mt6323.dtsi
From
Date
On Fri, 2018-03-02 at 09:40 -0600, Rob Herring wrote:
> On Fri, Feb 23, 2018 at 06:16:33PM +0800, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > Since those LEDs are parts of PMIC MT6323, it is reasonable to merge
> > those LEDs node definition back into mt6323.dtsi. This way can improve
> > the reusability of those nodes among different boards with the same PMIC.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > Cc: Lee Jones <lee.jones@linaro.org>
> > ---
> > arch/arm/boot/dts/mt6323.dtsi | 26 ++++++++++++++++++++++++-
> > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 28 ---------------------------
> > 2 files changed, 25 insertions(+), 29 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
> > index 7c783d6..44c5642 100644
> > --- a/arch/arm/boot/dts/mt6323.dtsi
> > +++ b/arch/arm/boot/dts/mt6323.dtsi
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (c) 2017 MediaTek Inc.
> > + * Copyright (c) 2017-2018 MediaTek Inc.
> > * Author: John Crispin <john@phrozen.org>
> > * Sean Wang <sean.wang@mediatek.com>
> > * This program is free software; you can redistribute it and/or modify
> > @@ -237,5 +237,29 @@
> > regulator-enable-ramp-delay = <216>;
> > };
> > };
> > +
> > + leds {
> > + compatible = "mediatek,mt6323-led";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + led@0 {
> > + reg = <0>;
> > + label = "mt6323:isink:green";
>
> Changing the label potentially breaks userspace. And the fact that it is
> a green LED is very much board specific. So I think the old location was
> correct. You could put the parent node here and leave these child nodes
> in the board specific dts file.
>

yes, I really made a mistake on breaking userspace with a label change.

I will keep the parent node here and then leave these child nodes into
board specific dts files. thanks for your idea!

>
> > + default-state = "off";
> > + };
> > +
> > + led@1 {
> > + reg = <1>;
> > + label = "mt6323:isink:red";
> > + default-state = "off";
> > + };
> > +
> > + led@2 {
> > + reg = <2>;
> > + label = "mt6323:isink:blue";
> > + default-state = "off";
> > + };
> > + };
> > };
> > };
> > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > index 75e61c4..767b225 100644
> > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > @@ -483,34 +483,6 @@
> > status = "okay";
> > };
> >
> > -&pwrap {
> > - mt6323 {
> > - mt6323led: led {
> > - compatible = "mediatek,mt6323-led";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - led@0 {
> > - reg = <0>;
> > - label = "bpi-r2:isink:green";
> > - default-state = "off";
> > - };
> > -
> > - led@1 {
> > - reg = <1>;
> > - label = "bpi-r2:isink:red";
> > - default-state = "off";
> > - };
> > -
> > - led@2 {
> > - reg = <2>;
> > - label = "bpi-r2:isink:blue";
> > - default-state = "off";
> > - };
> > - };
> > - };
> > -};
> > -
> > &spi0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&spi0_pins_a>;
> > --
> > 2.7.4
> >


\
 
 \ /
  Last update: 2018-03-02 23:47    [W:0.361 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site