lkml.org 
[lkml]   [2018]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/9] Staging: iio: accel: adis16201: Remove unnecessary comments
On Sat, 17 Mar 2018 01:36:19 +0530
Himanshu Jha <himanshujha199640@gmail.com> wrote:

> Remove few unnecessary comments since the macro definitions clearly
> justify their purpose.
>
> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Seems like a good balance between enough information and too much noise
so applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> v2:
> -reodered patch series.
>
> drivers/staging/iio/accel/adis16201.c | 36 -----------------------------------
> 1 file changed, 36 deletions(-)
>
> diff --git a/drivers/staging/iio/accel/adis16201.c b/drivers/staging/iio/accel/adis16201.c
> index 767ebf0..6c06c0d 100644
> --- a/drivers/staging/iio/accel/adis16201.c
> +++ b/drivers/staging/iio/accel/adis16201.c
> @@ -22,96 +22,66 @@
>
> #define ADIS16201_STARTUP_DELAY_MS 220
>
> -/* Flash memory write count */
> #define ADIS16201_FLASH_CNT 0x00
>
> -/* Output, power supply */
> #define ADIS16201_SUPPLY_OUT 0x02
>
> -/* Output, x-axis accelerometer */
> #define ADIS16201_XACCL_OUT 0x04
>
> -/* Output, y-axis accelerometer */
> #define ADIS16201_YACCL_OUT 0x06
>
> -/* Output, auxiliary ADC input */
> #define ADIS16201_AUX_ADC 0x08
>
> -/* Output, temperature */
> #define ADIS16201_TEMP_OUT 0x0A
>
> -/* Output, x-axis inclination */
> #define ADIS16201_XINCL_OUT 0x0C
>
> -/* Output, y-axis inclination */
> #define ADIS16201_YINCL_OUT 0x0E
>
> -/* Calibration, x-axis acceleration offset */
> #define ADIS16201_XACCL_OFFS 0x10
>
> -/* Calibration, y-axis acceleration offset */
> #define ADIS16201_YACCL_OFFS 0x12
>
> -/* x-axis acceleration scale factor */
> #define ADIS16201_XACCL_SCALE 0x14
>
> -/* y-axis acceleration scale factor */
> #define ADIS16201_YACCL_SCALE 0x16
>
> -/* Calibration, x-axis inclination offset */
> #define ADIS16201_XINCL_OFFS 0x18
>
> -/* Calibration, y-axis inclination offset */
> #define ADIS16201_YINCL_OFFS 0x1A
>
> -/* x-axis inclination scale factor */
> #define ADIS16201_XINCL_SCALE 0x1C
>
> -/* y-axis inclination scale factor */
> #define ADIS16201_YINCL_SCALE 0x1E
>
> -/* Alarm 1 amplitude threshold */
> #define ADIS16201_ALM_MAG1 0x20
>
> -/* Alarm 2 amplitude threshold */
> #define ADIS16201_ALM_MAG2 0x22
>
> -/* Alarm 1, sample period */
> #define ADIS16201_ALM_SMPL1 0x24
>
> -/* Alarm 2, sample period */
> #define ADIS16201_ALM_SMPL2 0x26
>
> -/* Alarm control */
> #define ADIS16201_ALM_CTRL 0x28
>
> -/* Auxiliary DAC data */
> #define ADIS16201_AUX_DAC 0x30
>
> -/* General-purpose digital input/output control */
> #define ADIS16201_GPIO_CTRL 0x32
>
> -/* Miscellaneous control */
> #define ADIS16201_MSC_CTRL 0x34
>
> -/* Internal sample period (rate) control */
> #define ADIS16201_SMPL_PRD 0x36
>
> /* Operation, filter configuration */
> #define ADIS16201_AVG_CNT 0x38
>
> -/* Operation, sleep mode control */
> #define ADIS16201_SLP_CNT 0x3A
>
> -/* Diagnostics, system status register */
> #define ADIS16201_DIAG_STAT 0x3C
>
> -/* Operation, system command register */
> #define ADIS16201_GLOB_CMD 0x3E
>
> -/* MSC_CTRL */
>
> -/* Self-test enable */
> #define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
>
> /* Data-ready enable: 1 = enabled, 0 = disabled */
> @@ -123,18 +93,13 @@
> /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
> #define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
>
> -/* DIAG_STAT */
>
> -/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
> #define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
>
> -/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
> #define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
>
> -/* SPI communications failure */
> #define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
>
> -/* Flash update failure */
> #define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2
>
> /* Power supply above 3.625 V */
> @@ -143,7 +108,6 @@
> /* Power supply below 3.15 V */
> #define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
>
> -/* GLOB_CMD */
>
> #define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
> #define ADIS16201_GLOB_CMD_FACTORY_RESET BIT(1)

\
 
 \ /
  Last update: 2018-03-18 09:23    [W:0.435 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site