lkml.org 
[lkml]   [2018]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware
Date
Add a documentation file about the Timer/Counter Unit (TCU)
present in the Ingenic JZ47xx SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Documentation/mips/00-INDEX | 3 +++
Documentation/mips/ingenic-tcu.txt | 50 ++++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 Documentation/mips/ingenic-tcu.txt

v4: New patch in this series

diff --git a/Documentation/mips/00-INDEX b/Documentation/mips/00-INDEX
index 8ae9cffc2262..8ab8c3f83771 100644
--- a/Documentation/mips/00-INDEX
+++ b/Documentation/mips/00-INDEX
@@ -2,3 +2,6 @@
- this file.
AU1xxx_IDE.README
- README for MIPS AU1XXX IDE driver.
+ingenic-tcu.txt
+ - Information file about the Timer/Counter Unit present
+ in Ingenic JZ47xx SoCs.
diff --git a/Documentation/mips/ingenic-tcu.txt b/Documentation/mips/ingenic-tcu.txt
new file mode 100644
index 000000000000..2508e5793da8
--- /dev/null
+++ b/Documentation/mips/ingenic-tcu.txt
@@ -0,0 +1,50 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit hardware
+-----------------------------------------------
+
+The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
+hardware block. It features eight channels, that can be used as counters,
+timers, or PWM.
+
+- JZ4770 introduced a separate channel, called Operating System Timer (OST).
+ It is a 64-bit programmable timer.
+
+- Each one of the eight channels has its own clock, which can be reparented
+ to three different clocks (pclk, ext, rtc), gated, and reclocked, through
+ their TCSR register.
+ * The watchdog and OST hardware blocks also feature a TCSR register with
+ the same format in their register space.
+ * The TCU registers used to gate/ungate can also gate/ungate the watchdog
+ and OST clocks.
+
+- On SoCs >= JZ4770, there are two different modes:
+ * Channels 0, 3-7 operate in TCU1 mode: they cannot work in sleep mode,
+ but are easier to operate.
+ * Channels 1-2 operate in TCU2 mode: they can work in sleep mode, but
+ the operation is a bit more complicated than with TCU1 channels.
+
+- Each channel can generate an interrupt. Some channels share an interrupt
+ line, some don't, and this changes between SoC versions:
+ * on JZ4740, timer 0 and timer 1 have their own interrupt line; others share
+ one interrupt line.
+ * on JZ4770 and JZ4780, timer 5 has its own interrupt; timers 0-4 and 6-7 all
+ use one interrupt line; the OST uses the last interrupt.
+
+Implementation
+--------------
+
+The functionalities of the TCU hardware are spread across multiple drivers:
+- interrupts: drivers/irqchip/irq-ingenic-tcu.c
+- clocks: drivers/clk/ingenic/tcu.c
+- timer: drivers/clocksource/timer-ingenic.c
+- PWM: drivers/pwm/pwm-jz4740.c
+- watchdog: drivers/watchdog/jz4740_wdt.c
+- OST: (none yet)
+
+Because various functionalities of the TCU that belong to different drivers
+and frameworks can be controlled from the same registers, all of these drivers
+access their registers through the same regmap.
+
+In practice, the devicetree nodes for all of these drivers must be children
+of a "syscon" node that defines the register area.
+For more information regarding the devicetree bindings of the TCU drivers,
+have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
--
2.11.0
\
 
 \ /
  Last update: 2018-03-18 00:32    [W:0.192 / U:1.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site