lkml.org 
[lkml]   [2018]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/14] Input: atmel_mxt_ts - do not pass suspend mode in platform data
On Sat, Mar 17, 2018 at 10:42:40AM -0700, Dmitry Torokhov wrote:
> On Fri, Mar 16, 2018 at 08:40:02PM +0000, Nick Dyer wrote:
> > On Thu, Mar 15, 2018 at 04:56:21PM -0700, Dmitry Torokhov wrote:
> > > Ah, OK, I see. I would really like to drop this
> > > pdata->suspend_mode stuff and I do not want to create
> > > "pixel-screwed-up" property either... I guess for the time being
> > > I'll put a DMI quirk for Link to restore T9 control method, and
> > > then look into cleaning it all up. We have quite a bit different
> > > code in chromeos kernel trees and I'd like to reconcile
> > > it.
> >
> > Yes, it would be great to get rid of it. The driver does have the
> > ability to download configuration via the firmware loader interface.
> > So you would be able to grab a copy of the config by saving it with
> > mxt-app, tweak it to ensure that the T9 CTRL byte is set correctly,
> > then ship it somehow (presumably it could be added to
> > linux-firmware). This would override what's currently stored in
> > NVRAM on all those units and mean we could remove the T9_CTRL stuff.
>
> We can't really rely on people fetching updated config. Do you think we
> could see if the device has only T9 and not T100 and if coming out of
> suspend the T9 CTRL byte is 0 we overwrite it with the 0x83?

I think that all we need to do is add something to
mxt_read_t9_resolution (and probably rename it to mxt_init_t9_config)
that reads the 1st (CTRL) byte, and if it's zero, writes 0x83 (and
probably a dev_dbg() wouldn't go amiss)

Also call the same logic on reset (look for "Detect reset"), because
that wipes out the config.

Once we've done that, we can get rid of the MXT_SUSPEND_T9_CTRL and use
the normal T7 power up/down logic for suspend/resume on all devices.

FWIW there may be two instances of T9, but I've never seen a device that
actually had two screens and it's not supported really anyway with this
driver.

N

\
 
 \ /
  Last update: 2018-03-17 21:42    [W:0.097 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site